Engine Oil and Water Pump Drive - Disassemble
拆解步骤
Show/hide table
| 所需工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件说明 | 数量 |
| A | 1P-0520 | 冲头总成 | 1 |
开始:
- 拆卸发动机机油和水泵驱动器。 参考拆解与组装, "发动机机油和水泵驱动器 - 拆卸"。
- 将 O 形密封圈 (3) 从适配器组件 (2) 上拆下。
Show/hide table
 | |
| 图 1 | g00994064 |
- 使用工具 (A) 从适配器组件 (2) 拆下轴承 (1) 。
- 卸下螺栓 (5) 。
Show/hide table
 | |
| 图 2 | g00994065 |
- 从适配器组件 (4) 上拆下止推垫圈 (7) 。
- 从轴组件 (6) 上拆卸适配器组件 (4) 。
- 拆下螺栓 (8) 。
Show/hide table
 | |
| 图 3 | g00994066 |
- 从轴组件 (6) 上拆下齿轮 (9) 。
- 将 O 形密封圈 (11) 从适配器组件 (4) 上拆下。
Show/hide table
 | |
| 图 4 | g00994070 |
- 使用工具 (A) 从适配器组件 (4) 上拆下轴承 (10) 。
Caterpillar Information System:
C9 Marine Engines and C9 Marine Generator Sets Inlet Air Temperature Sensor - Remove and Install
C9 Marine Engines and C9 Marine Generator Sets Injection Actuation Pressure Sensor - Remove and Install
3516B HD Generator Set Refill Capacities
C9 Marine Engines and C9 Marine Generator Sets Fuel Temperature Sensor - Remove and Install
EMCPII+ for Gas Engines GSC CID 0168 - FMI 04
EMCPII+ for Gas Engines GSC CID 0168 - FMI 03
G3520C and G3520E Generator Set Engines Engine Oil and Water Pump Drive - Install
G3520C and G3520E Generator Set Engines Engine Oil and Water Pump Drive - Remove
C9 Marine Engines and C9 Marine Generator Sets Fuel Pressure Sensor - Remove and Install
C11, C13, and C15 On-highway Engines Diagnostic Flash Code Retrieval
C11, C13 and C15 On-highway Engines 0284-06 Engine Coolant Diverter current high (98)
C11, C13 and C15 On-highway Engines 0284-05 Engine Coolant Diverter current low (98)
G3520C and G3520E Generator Set Engines Engine Oil and Water Pump Drive - Assemble
C9 Marine Engines and C9 Marine Generator Sets Speed/Timing Sensor - Remove and Install
EMCPII+ for Gas Engines GSC CID 0190 - FMI 02
2003/03/10 New Terminology is Now Used {7000}
EMCPII+ for Gas Engines GSC CID 0190 - FMI 03
G3520C and G3520E Generator Set Engines Exhaust Elbow - Remove and Install
EMCPII+ for Gas Engines GSC CID 0269 - FMI 03
C7 Urban Transit Bus Engines Caterpillar Driver Information Display - Messenger
3054E Industrial Engine Balancer Group - Install - If Equipped
G3500B Engines Engine Oil Lines - Turbocharger Oil Lines
G3500B Engines Exhaust Manifold
EMCPII+ for Gas Engines GSC CID 0269 - FMI 04