Recoil Spring
Show/hide table
Illustration 1 | g00106783 |
(1) 186-2367 Spring
- Free length ... 650 mm (25.6 inch)
- Outside diameter ... 214 mm (8.4 inch)
(2) Tighten the nut (2) in order to achieve the Dimension "B".
Dimension "B" ... 600 ± 1 mm (23.6 ± .04 inch)
(3) Apply 4C-4030 Thread Lock Compound on the threads of two bolts (3).
Caterpillar Information System:
2003/01/01 A New Drain Valve Group is Available to Drain Condensate from the Air Plenum {1094, 1372}
CIPI UNDERCARRIAGE Arrangements: 166-7047, 177-3011, 177-3553, 177-4279, 200-2995, 200-4060, 204-0808, 212-6225, 213-8653, 215-7227, 218-2237, 231-5143, 3Q-6638, 3Q-6641, 6Z-7749, 6Z-7751, 6Z-7857, 6Z-7890, 6Z-7926, 6Z-7938, 6Z-7992, 9Q-5034, 9Q-5042 Front Idler
3126B Marine Engines CID 0102 FMI 04 Boost Pressure Sensor short to ground
C7 Petroleum Engines Basic Engine
C11, C13 and C15 On-highway Engines Injector Code - Calibrate
3126B Marine Engines CID 0102 FMI 03 Boost Pressure Sensor short to +batt
3056E Industrial Engine Water Pump - Remove and Install
C7 Petroleum Engines Air Inlet and Exhaust System
C15 On-highway Engine Fuel Filter Lines
G3500B Engines Water Temperature Regulator
3500B Engines Thermostatic Valve
3056E Industrial Engine Water Outlet Manifold - Remove and Install
3056E Industrial Engine Engine Oil Cooler - Remove
3056E Industrial Engine Engine Oil Cooler - Install
C27 and C32 Generator Set Engines Valve Mechanism
C7 On-highway Engine Exhaust Manifold
2003/03/01 New Valve Group and Coil Now Used {3139}
G3520C and G3520E Generator Set Engines Circuit Breaker
2003/02/24 A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
G3520C and G3520E Generator Set Engines Air/Fuel Ratio Control - Adjust
C7 and C9 On-Highway Engines Exhaust Brake Parameters
C15 On-highway Engine Valve Mechanism Cover
3056E Industrial Engine Engine Oil Filter Base - Remove and Install
C15 Petroleum Generator Set Engines Electronic Unit Injector Wiring