G3500 Engines Caterpillar


Exhaust Manifold - Dry

Usage:

G3508 2TJ


Illustration 1g00934928

Note: Apply 5P-3931 Anti-Seize Compound on the following items on the exhaust manifolds:

  • Threads of bolts

  • Plugs

  • Studs

  • Nuts

(1) Stud

Torque ... 35 ± 5 N·m (25 ± 4 lb ft)

(2) Nut

Torque ... 35 ± 5 N·m (25 ± 4 lb ft)

(3) Bolt

Tighten diagonally opposite bolts at the same time.

Torque ... 55 ± 5 N·m (41 ± 4 lb ft)


Illustration 2g00934929

(4) Bolt

Torque ... 55 ± 5 N·m (41 ± 4 lb ft)

(5) Nut

Torque ... 55 ± 5 N·m (41 ± 4 lb ft)

(6) Nut

Torque ... 55 ± 5 N·m (41 ± 4 lb ft)

Caterpillar Information System:

C7 and C9 On-Highway Engines Air Inlet Heater Circuit - Test
Test Sequence for Pencil Type Fuel Nozzles{1254} Test Sequence for Pencil Type Fuel Nozzles{1254}
3056E Industrial Engine Fuel Injection Nozzles - Install
3056E Industrial Engine Fuel Injection Nozzles - Remove
G3520C and G3520E Generator Set Engines Cat Data Link - Test
G3520B Industrial Engine MID 036 - CID 1720 - FMI 09 Turbocharger Compressor Bypass Valve Actuator not communicating on link
G3520B Industrial Engine MID 036 - CID 1440 - FMI 09 Unable to communicate with Throttle Actuator Drv
G3408C and G3412C Engines Engine Oil Filter Base
G3406 Engines Engine Oil Filter Base
2002/12/16 New Water Seals Provide Increased Stability At Higher Temperatures {1100, 1124}
2010/10/06 New Water Seals Provide Increased Stability At Higher Temperatures {1100, 1124}
G3408C and G3412C Engines Cylinder Head
2002/12/01 New Thermocouples Are Used To Measure The Engine Exhaust Temperature {1059, 1919}
SR4 HV and SR4B HV Generators Generator Set - Test
3056E Industrial Engine Exhaust Manifold - Remove and Install - Three-Piece Exhaust Manifold
G3500 Engines Exhaust Manifold - Dry
G3520C and G3520E Engines Spark Plug
416C, 426C, 428C, 436C and 438C Backhoe Loaders Emissions Certification Film
G3408 and G3412 Engines Idler Gear Assembly
2002/11/01 A New Fuel Transfer Pump Group Is Used {1256}
3056E Industrial Engine Exhaust Manifold - Remove and Install - Two-Piece Exhaust Manifold
G3408 and G3412 Engines Piston and Rings
C13 On-highway Engine Engine Design
3056E Industrial Engine Valve Mechanism Cover - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.