Illustration 1 | g00883118 |
Typical example |
Note: New nuts are treated in order to prevent seizure. In order to reuse the old nuts, clean the nuts and apply 4C-5598 Anti-Seize Compound.
(1) Tighten the nut to the following torque. ...
(2) Tighten the stud into the exhaust manifold to the following torque. ...
(3) Tighten the bolt for the oil supply line to the following torque. ...
(4) Tighten the bolt for the oil return line to the following torque. ...
(5) Tighten the compression fitting to the following torque. ...
(6) Tighten the union to the following torque. ...
(7) Tighten the bolt for the oil return line to the following torque. ...
Tighten the nut for the exhaust elbow (not shown) to the following torque. ...