Mechanical Gauge - Test
To check the pressure gauge, connect the gauge to a pressure source that can be measured with accuracy. Compare the pressure on the gauge of test equipment with the pressures on the direct reading gauge. Refer to Specifications, "Pressure Gauge" for the test pressures. If the gauge is not within each specified pressure range, replace the gauge.
Caterpillar Information System:
C18 Generator Set Engine Rating Definitions
3056E Industrial Engine Fuel Filter Base
3412E, C30 and C32 Marine Engines System Overview
G3500 Generator Sets Emergency Stopping
G3500 Generator Sets Plate Locations and Film Locations
Break-In Procedure for New Cylinder Liners and Piston Rings{1215, 1216} Break-In Procedure for New Cylinder Liners and Piston Rings{1215, 1216}
2002/06/01 Corrections to Disassembly and Assembly, RENR1333, "3618 Engine" , "Piston and Connecting Rods - Install" {1214}
C27 and C32 Generator Set Engines Engine Oil Filter Base - Assemble
797B Off-Highway Truck Air System Control Valve (Air Dryer)
G3500 Generator Sets Overhaul (Major)
2002/04/01 A New Connecting Rod Is Available {1218}
C27 and C32 Generator Set Engines Engine Oil Filter Base - Disassemble
3056E Industrial Engine Turbocharger
3412E, C30 and C32 Marine Engines Water Temperature Regulator - Remove and Install
3056E Industrial Engine Crankcase Breather
C18 Marine Engines Sensors and Electrical Components
Electronic Modular Control Panel II+ (EMCP II+) Sensors
3056E Industrial Engine Water Pump
Electronic Modular Control Panel II+ (EMCP II+) Voltmeter/Ammeter Programming OP8
3512 and 3516 EUI Engines and 784B, 785B, 789B and 793B Off-Highway Truck/Tractors Water Pump
Electronic Modular Control Panel II+ (EMCP II+) Engine Setpoint Verification OP9
Electronic Modular Control Panel II+ (EMCP II+) Diagnostic Codes
G3500 Generator Sets Voltage Regulators
C18 Marine Auxiliary Engine Model View Illustrations