Electrical Connectors and Functions
Show/hide table
Illustration 1 | g00607248 |
Electronic Control Module (ECM) |
Show/hide table
Illustration 2 | g00870177 |
40 Pin Customer Connector |
Show/hide table
Illustration 3 | g00680846 |
2 Pin Electrical Connectors. |
Show/hide table
Illustration 4 | g00893487 |
ECM Connector |
Show/hide table
Illustration 5 | g00680848 |
3 Pin Electrical Connectors. |
Caterpillar Information System:
3500 Generator Set Engines Sending Unit - Water Temperature
3500 Generator Set Engines Sending Unit - Engine Oil Pressure
G3612 and G3616 Engines Fuel Lines - Remove and Install
N3 Series Brushless Alternators Stator - Test
3406E, C12, C15 and C18 Marine Engines Electrical Power Supply Circuit - Test
3406E, C12, C15 and C18 Marine Engines Analog Sensor Supply Circuit - Test
3406E, C12, C15 and C18 Marine Engines Sensors and Electrical Connectors
3618 Engine Transducer - Calibrate
3500 Generator Set Engines Temperature Gauge
G3612 and G3616 Engines Detonation Sensor - Remove and Install
G3612 and G3616 Engines Spark Plugs - Remove and Install
3500 Generator Set Engines Temperature Gauge
3500 Generator Set Engines Service Meter
3406E, C12, C15 and C18 Marine Engines Engine Temperature Sensor Open or Short Circuit - Test
2002/03/01 A New Service Manual, RENR5901, "Engine Oil Cooler" Is Available {1378}
2002/04/01 Two Valve Covers Are Available For Venting Fumes From The Crankcase {1107, 1317}
N3 Series Brushless Alternators Regulator - Test
2002/04/01 New Tools Are Available For Rebuilding The Cylinder Head {1100}
G3612 and G3616 Engines Engine Oil Filter Housings - Remove
2002/05/01 Oversized Valve Seat Inserts Are Available {1103}
2002/03/01 The New 201-8114 Exhaust Valve Is Available {1105}
3500 Industrial Engines Tachometer
G3612 and G3616 Engines Engine Oil Filter Housings - Install
3500 Generator Set Engines Tachometer