Sending Unit - Engine Oil Pressure
Show/hide table
| |
| Illustration 1 | g00505955 |
During the calibration check, tap the sending unit for the engine oil pressure. Take readings on decreasing pressure.
Show/hide table
| Calibration Chart | |
| Pressure | Test Resistance |
| |
240 + 17 − 13 |
| |
153 + 9.5 − 11 |
| |
33.5 + 16 − 12 |
Caterpillar Information System:
G3612 and G3616 Engines Fuel Lines - Remove and Install
N3 Series Brushless Alternators Stator - Test
3406E, C12, C15 and C18 Marine Engines Electrical Power Supply Circuit - Test
3406E, C12, C15 and C18 Marine Engines Analog Sensor Supply Circuit - Test
3406E, C12, C15 and C18 Marine Engines Sensors and Electrical Connectors
3618 Engine Transducer - Calibrate
3500 Generator Set Engines Temperature Gauge
G3612 and G3616 Engines Detonation Sensor - Remove and Install
G3612 and G3616 Engines Spark Plugs - Remove and Install
3500 Generator Set Engines Temperature Gauge
2002/03/01 A New Service Manual, RENR5971, "System Operation And Programming Guides For Digital Governor Control Used On 3618 Engine" Is Available {1908}
3500 Generator Set Engines Pressure Gauge - Hydraulic Oil
3500 Generator Set Engines Sending Unit - Water Temperature
3512B Petroleum Engines with the ADEM 2 Electronic Control Module Electrical Connectors and Functions
3500 Generator Set Engines Service Meter
3406E, C12, C15 and C18 Marine Engines Engine Temperature Sensor Open or Short Circuit - Test
2002/03/01 A New Service Manual, RENR5901, "Engine Oil Cooler" Is Available {1378}
2002/04/01 Two Valve Covers Are Available For Venting Fumes From The Crankcase {1107, 1317}
N3 Series Brushless Alternators Regulator - Test
2002/04/01 New Tools Are Available For Rebuilding The Cylinder Head {1100}
G3612 and G3616 Engines Engine Oil Filter Housings - Remove
2002/05/01 Oversized Valve Seat Inserts Are Available {1103}
2002/03/01 The New 201-8114 Exhaust Valve Is Available {1105}
3500 Industrial Engines Tachometer