3500 Generator Set Engines Caterpillar


Temperature Gauge

Usage:

3508 1ZF


Illustration 1g00505617


Illustration 2g00505747

Note: Warm the indicator for a minimum of five minutes with 27 ± 0.3 volts before testing the indicator.

(1) Test voltage ... 27 ± 0.3

(2) Resistance

(3) Negative case ground

Note: A mounting clamp or a mount clamp stud is not an adequate ground.

Table 1
Calibration Chart 
Pointer Position  Test Resistance  Direction of pointer travel 
50 °C (122 °F)  2060 + 270 − 230  Clockwise 
80 °C (176 °F)  945 + 75 − 65  Clockwise 
100 °C (212 °F)  602 + 16 − 12  Clockwise 

Caterpillar Information System:

G3612 and G3616 Engines Detonation Sensor - Remove and Install
G3612 and G3616 Engines Spark Plugs - Remove and Install
3500 Generator Set Engines Temperature Gauge
2002/03/01 A New Service Manual, RENR5971, "System Operation And Programming Guides For Digital Governor Control Used On 3618 Engine" Is Available {1908}
3500 Generator Set Engines Pressure Gauge - Hydraulic Oil
G3606 and G3608 Engines Fuel Control Valve - Remove and Install
3618 Engine Thermocouple - Test - Main Bearings' Thermocouples
3500 Industrial Engines Vacuum Gauge
3618 Engine Particle Detector - Test
3618 Engine Oil Mist Detector - Test
3618 Engine Oil Pressure Transducer - Test - Shutdown for Low Engine Oil pressure
3500 Generator Set Engines Pressure Gauge - Engine Oil
3618 Engine Transducer - Calibrate
3406E, C12, C15 and C18 Marine Engines Sensors and Electrical Connectors
3406E, C12, C15 and C18 Marine Engines Analog Sensor Supply Circuit - Test
3406E, C12, C15 and C18 Marine Engines Electrical Power Supply Circuit - Test
N3 Series Brushless Alternators Stator - Test
G3612 and G3616 Engines Fuel Lines - Remove and Install
3500 Generator Set Engines Sending Unit - Engine Oil Pressure
3500 Generator Set Engines Sending Unit - Water Temperature
3512B Petroleum Engines with the ADEM 2 Electronic Control Module Electrical Connectors and Functions
3500 Generator Set Engines Service Meter
3406E, C12, C15 and C18 Marine Engines Engine Temperature Sensor Open or Short Circuit - Test
2002/03/01 A New Service Manual, RENR5901, "Engine Oil Cooler" Is Available {1378}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.