Tachometer
Show/hide table
Illustration 1 | g00869764 |
(1) Nut
- Torque ...
0.9 ± 0.1 N·m (8 ± 1 lb in)
(2) Program terminals
Show/hide table
Tachometer Program Chart | |
Number of Flywheel Teeth | Jumper Locations for the Program Board |
183 | Terminal A to Terminal 1 |
156 | Terminal A to Terminal 2 |
151 | Terminal A to Terminal 3 |
136 | Terminal A to Terminal 4 |
113 | Terminal A to Terminal 5 |
(3) Terminal connections for the engine speed sensor
Operating temperature range ...
The tachometer must be accurate within the following value. ... ± 0.5 percent
Input frequency range ... 75 to 9000 Hz
The time that is required to update the display is the following value.
Maximum ... 1.0 second
Minimum ... 0.25 second
Caterpillar Information System:
G3612 and G3616 Engines Engine Oil Filter Housings - Install
3500 Industrial Engines Tachometer
2002/03/01 The New 201-8114 Exhaust Valve Is Available {1105}
2002/05/01 Oversized Valve Seat Inserts Are Available {1103}
G3612 and G3616 Engines Engine Oil Filter Housings - Remove
2002/04/01 New Tools Are Available For Rebuilding The Cylinder Head {1100}
N3 Series Brushless Alternators Regulator - Test
2002/04/01 Two Valve Covers Are Available For Venting Fumes From The Crankcase {1107, 1317}
2002/03/01 A New Service Manual, RENR5901, "Engine Oil Cooler" Is Available {1378}
3406E, C12, C15 and C18 Marine Engines Engine Temperature Sensor Open or Short Circuit - Test
3500 Generator Set Engines Service Meter
3512B Petroleum Engines with the ADEM 2 Electronic Control Module Electrical Connectors and Functions
797B Off-Highway Truck Steering System Steering Cylinder
PMG3516 Power Module Generator Lead Connections
3406E, C12, C15 and C18 Marine Engines Engine Cranks but Will Not Start
N3 Series Brushless Alternators Alternator - Assemble
N3 Series Brushless Alternators Alternator - Disassemble
C15 and C18 Petroleum Generator Sets Generator Start-up Checklist
3508, 3512, and 3516 Generator Sets Bearing - Inspect - Generator
PMG3516 Power Module Insulation - Test
3176C and 3196 Engines for Caterpillar Built Machines Engine Misfires, Runs Rough or Is Unstable
3406E, C12, C15 and C18 Marine Engines Excessive Black Smoke
C32 Power Module Generator Set Installation
3126B Truck Engine Engine Lifting