Illustration 1 | g01960277 |
Note: Lubricate the threads of the locknut (1) with clean grease.
(1) Torque for the locknut ...
(A) Bore of the cylinder assembly ...
(B) Bore of the head over four lands ...
(C) Diameter of the rod ...
(2) Lubricate the sealing lip of the buffer seal assembly lightly with the lubricant that is being sealed.
(3) Lubricate the sealing lip of the U-cup seal lightly with the lubricant that is being sealed.
(4) Lubricate the sealing lip of the wiper seal lightly with the lubricant that is being sealed.
(5) Apply 4C-4032 Bearing Mount Compound to the wiper seal groove before assembly.
(6) Torque for eight bolts ...