Track - Remove and Install
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 444-0526 | Air/Hydraulic Jack Gp | 1 |
Show/hide table
 |
|
Personal injury or death can result from grease under pressure. Grease coming out of the relief valve under pressure can penetrate the body causing injury or death. Do not watch the relief valve to see if grease is escaping. Watch the track or track adjustment cylinder to see if the track is being loosened. Loosen the relief valve one turn only. If track does not loosen, close the relief valve and contact your Caterpillar dealer. |
- Release the tension on the track. Refer to Operation and Maintenance Manual, "Track - Adjust".
Show/hide table
Illustration 1 g06209874 - Use Tooling (A) to raise the side of the machine.
Show/hide table
Illustration 2 g06209898 - Use a suitable lifting device and a suitable pry bar to remove track (1). The weight of track (1) is approximately
150 kg (331 lb) .Show/hide table
Illustration 3 g06212144 - Position the machine onto suitable cribbing.
- Install track (1) in the reverse order of removal.
Caterpillar Information System:
New Hydraulic Pump Pressure Plates are Now Available for Certain Excavators and Wheeled Excavators {5073} New Hydraulic Pump Pressure Plates are Now Available for Certain Excavators and Wheeled Excavators {5073}
PM820, PM822, and PM825 Cold Planer Machine Systems Gear Pump (Charge) - Assemble
PM820, PM822, and PM825 Cold Planer Machine Systems Gear Pump (Charge) - Disassemble
Improved Handrail Assembly Is Now Used on Certain Excavators and Forest Machines Fitted with A Rear Entry Cab {7260} Improved Handrail Assembly Is Now Used on Certain Excavators and Forest Machines Fitted with A Rear Entry Cab {7260}
730, 730 Ejector, 735, 740 Ejector, and 745 Articulated Trucks Information Display Menu Navigation
320D2 FM Forestry Machine Engine Supplement Water Pump - Remove and Install
320D2 FM Forestry Machine Engine Supplement Water Temperature Regulator - Remove and Install
336 and 336 GC Excavator Stopping the Engine
Bluetooth Operator ID and Machine Security System (MSS) General Information
A Ground Wiring Addition Is Now Used for the ARD Nozzle Heater Relay on Certain C9.3 through C18 Tier 4 Machine Engines {1050, 108D, 1422, 4493} A Ground Wiring Addition Is Now Used for the ARD Nozzle Heater Relay on Certain C9.3 through C18 Tier 4 Machine Engines {1050, 108D, 1422, 4493}
S2050, S3050, S2070, S3070, S2090 and S3090 Shears General Information - Rotating Shear
730, 730 Ejector, 735, 740 Ejector, and 745 Articulated Trucks Information Display Display Navigation
S2050, S3050, S2070, S3070, S2090 and S3090 Shears Swivel
S2050, S3050, S2070, S3070, S2090 and S3090 Shears Gerotor Motor
S2050, S3050, S2070, S3070, S2090 and S3090 Shears Speed Control Valve
S2050, S3050, S2070, S3070, S2090 and S3090 Shears Hydraulic System Air - Purge
S2050, S3050, S2070, S3070, S2090 and S3090 Shears Hydraulic Rotator Cycle Time - Check
S2050, S3050, S2070, S3070, S2090 and S3090 Shears Control Manifold - Crossover Relief Valve
S2050, S3050, S2070, S3070, S2090 and S3090 Shears Control Valve Pressure (Hydraulic Rotator) - Test
S2050, S3050, S2070, S3070, S2090 and S3090 Shears Hydraulic Cylinder Cycle Time - Check
S2050, S3050, S2070, S3070, S2090 and S3090 Shears Speed Control Valve (Hydraulic Cylinder) - Test and Adjust
S2050, S3050, S2070, S3070, S2090 and S3090 Shears Hydraulic Cylinder Leakage - Test
S2050, S3050, S2070, S3070, S2090 and S3090 Shears Swivel Leakage - Test
New Cat Grade Control/Cat Production Measurement Software Is Now Available on Certain 336F XE, 349F XE, 352F XE, 374F and 390F Excavators {7610, 7620} New Cat Grade Control/Cat Production Measurement Software Is Now Available on Certain 336F XE, 349F XE, 352F XE, 374F and 390F Excavators {7610, 7620}