Improved Handrail Assembly Is Now Used on Certain Excavators and Forest Machines Fitted with A Rear Entry Cab {7260}
- Excavator
- 568 (S/N: BRB1-401)
- Forest Machine
- 558 (S/N: LRT1-274)
Description Of Change: An improved handrail assembly is now available on the machines listed above. The improved handrail assembly allows more hand clearance between the riser grab rail and the battery box door, when holding the rail and opening the door.
Adaptable To: The following changes are adaptable to the machines within the listed serial numbers, and are effective with all machines after the listed serial numbers.
Show/hide table
Illustration 1 | g06210377 |
Former (1) (A) |
Show/hide table
Illustration 2 | g06210767 |
Improved (1) (B) |
The handrail assembly has been improved, the part number has not changed. The improved handrail assembly has reduced tube diameter and it is used only on machines fitted with the rear entry cab.
Caterpillar Information System:
730, 730 Ejector, 735, 740 Ejector, and 745 Articulated Trucks Information Display Menu Navigation
320D2 FM Forestry Machine Engine Supplement Water Pump - Remove and Install
320D2 FM Forestry Machine Engine Supplement Water Temperature Regulator - Remove and Install
336 and 336 GC Excavator Stopping the Engine
Bluetooth Operator ID and Machine Security System (MSS) General Information
A Ground Wiring Addition Is Now Used for the ARD Nozzle Heater Relay on Certain C9.3 through C18 Tier 4 Machine Engines {1050, 108D, 1422, 4493} A Ground Wiring Addition Is Now Used for the ARD Nozzle Heater Relay on Certain C9.3 through C18 Tier 4 Machine Engines {1050, 108D, 1422, 4493}
S2050, S3050, S2070, S3070, S2090 and S3090 Shears General Information - Rotating Shear
730, 730 Ejector, 735, 740 Ejector, and 745 Articulated Trucks Information Display Display Navigation
G315B and G320B Waste Handling Grapple Grapple Housing and Shell Gp - Assemble
G315B and G320B Waste Handling Grapple Grapple Housing and Shell Gp - Disassemble
G315B and G320B Waste Handling Grapple Hydraulic Cylinder - Remove and Install
G315B and G320B Waste Handling Grapple Mounting Bracket - Remove and Install
PM820, PM822, and PM825 Cold Planer Machine Systems Gear Pump (Charge) - Disassemble
PM820, PM822, and PM825 Cold Planer Machine Systems Gear Pump (Charge) - Assemble
New Hydraulic Pump Pressure Plates are Now Available for Certain Excavators and Wheeled Excavators {5073} New Hydraulic Pump Pressure Plates are Now Available for Certain Excavators and Wheeled Excavators {5073}
304.5E2 XTC Mini Hydraulic Excavators Machine Systems Track - Remove and Install
S2050, S3050, S2070, S3070, S2090 and S3090 Shears Swivel
S2050, S3050, S2070, S3070, S2090 and S3090 Shears Gerotor Motor
S2050, S3050, S2070, S3070, S2090 and S3090 Shears Speed Control Valve
S2050, S3050, S2070, S3070, S2090 and S3090 Shears Hydraulic System Air - Purge
S2050, S3050, S2070, S3070, S2090 and S3090 Shears Hydraulic Rotator Cycle Time - Check
S2050, S3050, S2070, S3070, S2090 and S3090 Shears Control Manifold - Crossover Relief Valve
S2050, S3050, S2070, S3070, S2090 and S3090 Shears Control Valve Pressure (Hydraulic Rotator) - Test
S2050, S3050, S2070, S3070, S2090 and S3090 Shears Hydraulic Cylinder Cycle Time - Check