Gear Pump (Charge) - Disassemble
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 437-3776 | Fixture As. | 1 |
1U-5750 | Engine Stand | 1 | |
1U-9127 | Adapter Plate | 1 |
- Attach the gear pump to Tooling (A) or a suitable fixture.
- Remove bolts (2) and housing (1).
Show/hide table
Illustration 2 g06209679 - Remove plate (3) from housing (1).
Show/hide table
Illustration 3 g06209684 - Remove seal (4) and back up seal (5) from plate (3).
Show/hide table
Illustration 4 g06209688 - Remove shaft assemblies (6) and O-ring seal (7) from flange (8).
Show/hide table
Illustration 5 g06209690 - Remove plate (9) from flange (8).
Show/hide table
Illustration 6 g06209691 - Remove seal (10) and back up seal (11) from plate (9).
Show/hide table
Illustration 7 g06209694 - Remove retaining ring (12) and lip seal (13) from flange (8).
Show/hide table
Illustration 1 | g06209676 |
Caterpillar Information System:
Improved Handrail Assembly Is Now Used on Certain Excavators and Forest Machines Fitted with A Rear Entry Cab {7260} Improved Handrail Assembly Is Now Used on Certain Excavators and Forest Machines Fitted with A Rear Entry Cab {7260}
730, 730 Ejector, 735, 740 Ejector, and 745 Articulated Trucks Information Display Menu Navigation
320D2 FM Forestry Machine Engine Supplement Water Pump - Remove and Install
320D2 FM Forestry Machine Engine Supplement Water Temperature Regulator - Remove and Install
336 and 336 GC Excavator Stopping the Engine
Bluetooth Operator ID and Machine Security System (MSS) General Information
A Ground Wiring Addition Is Now Used for the ARD Nozzle Heater Relay on Certain C9.3 through C18 Tier 4 Machine Engines {1050, 108D, 1422, 4493} A Ground Wiring Addition Is Now Used for the ARD Nozzle Heater Relay on Certain C9.3 through C18 Tier 4 Machine Engines {1050, 108D, 1422, 4493}
S2050, S3050, S2070, S3070, S2090 and S3090 Shears General Information - Rotating Shear
730, 730 Ejector, 735, 740 Ejector, and 745 Articulated Trucks Information Display Display Navigation
G315B and G320B Waste Handling Grapple Grapple Housing and Shell Gp - Assemble
G315B and G320B Waste Handling Grapple Grapple Housing and Shell Gp - Disassemble
G315B and G320B Waste Handling Grapple Hydraulic Cylinder - Remove and Install
PM820, PM822, and PM825 Cold Planer Machine Systems Gear Pump (Charge) - Assemble
New Hydraulic Pump Pressure Plates are Now Available for Certain Excavators and Wheeled Excavators {5073} New Hydraulic Pump Pressure Plates are Now Available for Certain Excavators and Wheeled Excavators {5073}
304.5E2 XTC Mini Hydraulic Excavators Machine Systems Track - Remove and Install
S2050, S3050, S2070, S3070, S2090 and S3090 Shears Swivel
S2050, S3050, S2070, S3070, S2090 and S3090 Shears Gerotor Motor
S2050, S3050, S2070, S3070, S2090 and S3090 Shears Speed Control Valve
S2050, S3050, S2070, S3070, S2090 and S3090 Shears Hydraulic System Air - Purge
S2050, S3050, S2070, S3070, S2090 and S3090 Shears Hydraulic Rotator Cycle Time - Check
S2050, S3050, S2070, S3070, S2090 and S3090 Shears Control Manifold - Crossover Relief Valve
S2050, S3050, S2070, S3070, S2090 and S3090 Shears Control Valve Pressure (Hydraulic Rotator) - Test
S2050, S3050, S2070, S3070, S2090 and S3090 Shears Hydraulic Cylinder Cycle Time - Check
S2050, S3050, S2070, S3070, S2090 and S3090 Shears Speed Control Valve (Hydraulic Cylinder) - Test and Adjust