- Excavator
- 336F XE (S/N: KGH1-UP; YBH1-UP; NAJ1-UP; PFL1-UP; LTP1-UP; MTW1-UP; DFY1-UP)
- 349F XE (S/N: SFG1-UP; RAX1-UP)
- 352F XE (S/N: SD21-UP; MDR1-UP)
- 374F (S/N: EBF1-UP; MFL1-UP; DNM1-UP)
- 390F (S/N: MGF1-UP; FEH1-UP; GAY1-UP)
- 349F XE (S/N: SFG1-UP; RAX1-UP)
The following changes are adaptable to the products within the listed serial numbers.
A new Cat® Grade Control/Cat® Production Measurement software is now available on the machines listed above. Once the new software is flashed on your machine, you will get the feature described below.
New Software | ||
---|---|---|
Part Number | Description | Former Part Number |
CGC/CPM Software |
The new software is available in the form of a flash file through the Caterpillar Service Information System (SIS). A newer part number may be available. SIS web only displays the latest available flash file.
Fix the Issue of Lifetime Value Calculation
Illustration 1 | g06195946 |
Sent data |
Cat® Production Measurement Meter values (lifetime values) calculation on machine side was incorrect.
The calculation has been fixed and lifetime values, which are stored during CPM activation, now sends to Cat® VisionLink.