Hood - Remove and Install
- Open hood (1).
Show/hide table
Illustration 2 g06210035 - Remove nut (2) and reposition gas spring assembly (3) out of the way.
- Lower the hood.
Show/hide table
Illustration 3 g06210107 - Attach a suitable lifting device to hood (1). The weight of hood (1) is approximately
81 kg (179 lb) . - Remove bolts (4) and hood (1).
Show/hide table
Illustration 1 | g06210028 |
- Install hood (1) in the reverse order of removal.
Caterpillar Information System:
A New Turbocharger is Now Used for Certain 390F Hydraulic Excavator Engines {1052, 1053} A New Turbocharger is Now Used for Certain 390F Hydraulic Excavator Engines {1052, 1053}
336 and 336 GC Excavator Capacities (Refill)
320D2 FM Forestry Machine Engine Supplement Fan and Fan Drive - Remove and Install
New Cat Grade Control/Cat Production Measurement Software Is Now Available on Certain 336F XE, 349F XE, 352F XE, 374F and 390F Excavators {7610, 7620} New Cat Grade Control/Cat Production Measurement Software Is Now Available on Certain 336F XE, 349F XE, 352F XE, 374F and 390F Excavators {7610, 7620}
S2050, S3050, S2070, S3070, S2090 and S3090 Shears Swivel Leakage - Test
S2050, S3050, S2070, S3070, S2090 and S3090 Shears Hydraulic Cylinder Leakage - Test
S2050, S3050, S2070, S3070, S2090 and S3090 Shears Speed Control Valve (Hydraulic Cylinder) - Test and Adjust
S2050, S3050, S2070, S3070, S2090 and S3090 Shears Hydraulic Cylinder Cycle Time - Check
S2050, S3050, S2070, S3070, S2090 and S3090 Shears Control Valve Pressure (Hydraulic Rotator) - Test
S2050, S3050, S2070, S3070, S2090 and S3090 Shears Control Manifold - Crossover Relief Valve
S2050, S3050, S2070, S3070, S2090 and S3090 Shears Hydraulic Rotator Cycle Time - Check
S2050, S3050, S2070, S3070, S2090 and S3090 Shears Hydraulic System Air - Purge
Bluetooth Operator ID and Machine Security System (MSS) Normal Operation - Hydraulic Excavators
C9.3B Engines for Caterpillar Built Machines Camshaft Bearings - Remove
Procedure to Replace the Full Open Labyrinth with the Partial Open Labyrinth Motor Housing on the Final Drives for Certain Excavators and Mobile Hydraulic Power Units {4050} Procedure to Replace the Full Open Labyrinth with the Partial Open Labyrinth Motor Housing on the Final Drives for Certain Excavators and Mobile Hydraulic Power Units {4050}
336 and 336 GC Excavator Hydraulic System Oil Filter (Return) - Replace
A New Motor Housing is Now Available for Certain Excavators and Mobile Hydraulic Power Units {4050, 4351} A New Motor Housing is Now Available for Certain Excavators and Mobile Hydraulic Power Units {4050, 4351}
New Water Pump Troubleshooting is Now Used for Certain C15 and C18 Engines {1371, 7569} New Water Pump Troubleshooting is Now Used for Certain C15 and C18 Engines {1371, 7569}
New Water Pump Troubleshooting is Now Used for Certain C15 and C18 Machine Engines {1361, 7569} New Water Pump Troubleshooting is Now Used for Certain C15 and C18 Machine Engines {1361, 7569}
320D2 FM Forestry Machine Engine Supplement Fuel Cooler - Remove and Install
HM208 and HM210 Mulching Heads Drive Hub - Disassemble
HM208 and HM210 Mulching Heads Drive Hub - Assemble
730, 730 Ejector, 735, 740 Ejector, and 745 Articulated Trucks Information Display Display Settings
PM820, PM822, and PM825 Cold Planer Engine Supplement Air Cleaner - Remove and Install