A New Turbocharger is Now Used for Certain 390F Hydraulic Excavator Engines {1052, 1053}
- Excavator
- 390F (S/N: HJD1-20006; TYE1-223; HSM1-306; GAY1-20008)
- OEM Excavator Based Specialty Solution
- 390F OEM (S/N: P4J1-90201)
Description Of Change: The new turbocharger is fully machined to help prevent low cycle fatigue.
Adaptable To: The following changes are adaptable to the products within the listed serial numbers, and are effective with all products after the listed serial numbers.
Table 1 contains the new and previous part numbers for the turbocharger.
Show/hide table
Qty | New Part Number | Part Name | Previous Part Number |
---|---|---|---|
1 | Turbocharger Gp | 366-0183 |
Caterpillar Information System:
336 and 336 GC Excavator Capacities (Refill)
320D2 FM Forestry Machine Engine Supplement Fan and Fan Drive - Remove and Install
New Cat Grade Control/Cat Production Measurement Software Is Now Available on Certain 336F XE, 349F XE, 352F XE, 374F and 390F Excavators {7610, 7620} New Cat Grade Control/Cat Production Measurement Software Is Now Available on Certain 336F XE, 349F XE, 352F XE, 374F and 390F Excavators {7610, 7620}
S2050, S3050, S2070, S3070, S2090 and S3090 Shears Swivel Leakage - Test
S2050, S3050, S2070, S3070, S2090 and S3090 Shears Hydraulic Cylinder Leakage - Test
S2050, S3050, S2070, S3070, S2090 and S3090 Shears Speed Control Valve (Hydraulic Cylinder) - Test and Adjust
S2050, S3050, S2070, S3070, S2090 and S3090 Shears Hydraulic Cylinder Cycle Time - Check
S2050, S3050, S2070, S3070, S2090 and S3090 Shears Control Valve Pressure (Hydraulic Rotator) - Test
S2050, S3050, S2070, S3070, S2090 and S3090 Shears Control Manifold - Crossover Relief Valve
S2050, S3050, S2070, S3070, S2090 and S3090 Shears Hydraulic Rotator Cycle Time - Check
S2050, S3050, S2070, S3070, S2090 and S3090 Shears Hydraulic System Air - Purge
S2050, S3050, S2070, S3070, S2090 and S3090 Shears Speed Control Valve
320D2 FM Forestry Machine Engine Supplement Hood - Remove and Install
Bluetooth Operator ID and Machine Security System (MSS) Normal Operation - Hydraulic Excavators
C9.3B Engines for Caterpillar Built Machines Camshaft Bearings - Remove
Procedure to Replace the Full Open Labyrinth with the Partial Open Labyrinth Motor Housing on the Final Drives for Certain Excavators and Mobile Hydraulic Power Units {4050} Procedure to Replace the Full Open Labyrinth with the Partial Open Labyrinth Motor Housing on the Final Drives for Certain Excavators and Mobile Hydraulic Power Units {4050}
336 and 336 GC Excavator Hydraulic System Oil Filter (Return) - Replace
A New Motor Housing is Now Available for Certain Excavators and Mobile Hydraulic Power Units {4050, 4351} A New Motor Housing is Now Available for Certain Excavators and Mobile Hydraulic Power Units {4050, 4351}
New Water Pump Troubleshooting is Now Used for Certain C15 and C18 Engines {1371, 7569} New Water Pump Troubleshooting is Now Used for Certain C15 and C18 Engines {1371, 7569}
New Water Pump Troubleshooting is Now Used for Certain C15 and C18 Machine Engines {1361, 7569} New Water Pump Troubleshooting is Now Used for Certain C15 and C18 Machine Engines {1361, 7569}
320D2 FM Forestry Machine Engine Supplement Fuel Cooler - Remove and Install
HM208 and HM210 Mulching Heads Drive Hub - Disassemble
HM208 and HM210 Mulching Heads Drive Hub - Assemble
730, 730 Ejector, 735, 740 Ejector, and 745 Articulated Trucks Information Display Display Settings