New Hydrax Electronic Control Is Available {1900}
- Engine:
- G3606 (S/N: 3XF1-UP)
- G3608 (S/N: 4WF1-UP)
- G3612 (S/N: 1YG1-UP)
- G3616 (S/N: 4CG1-UP)
Description of Change: Improvements have been made to the Hydrax Electronic Control. The new 197-5934 Hydrax Electronic Control has improved internal electronics. These improvements have been designed to increase the reliability of the Hydrax Electronic Control. Hydrax Electronic Controls are used to control the following items:
- fuel actuator
- wastegate actuator
- choke actuator
Show/hide table
 | |
| Illustration 1 | g00799980 |
(1) Hydrax junction box (shown without front cover) (2) 197-5934 Hydrax Electronic Control (three shown) (3) Bracket | |
Adaptable To: The new 197-5934 Hydrax Electronic Control is a direct replacement for the previous 129-1689 Hydrax Electronic Control. The 129-1689 Hydrax Electronic Control has been cancelled.
Caterpillar Information System:
3054, 3054B and 3056 Marine Engines Heat Exchanger - Assemble - 3054 and 3054B Engines
3054, 3054B and 3056 Marine Engines Heat Exchanger - Disassemble - 3054 and 3054B Engines
3054, 3054B and 3056 Marine Engines Heat Exchanger - Install - 3054 and 3054B Engines
797 Off-Highway Truck Power Train Final Drive - Assemble
Electronic Modular Control Panel II (EMCP II) GSC CID 0441 - FMI 12 (for MUI Engines)
3034 Marine Engine Fuel System Secondary Filter - Replace
3054, 3054B and 3056 Marine Engines Heat Exchanger - Remove - 3054 and 3054B Engines
Electronic Modular Control Panel II+ (EMCP II+) Starting Motor Magnetic Switch - Test
3512B Marine Auxiliary Engine System Overview
G3520C and G3520E Engines Water Temperature Regulator
120H and 135H Motor Graders Alternate Exit
G3600 Engines Engine Speed/Timing Sensor - Clean/Inspect
EMCPII+ for Gas Engines Starting Motor Magnetic Switch - Test - 3500 Engines Only
2001/06/01 Change to the Torque of the Adjusting Screw Locknut for the Unit Injector (Specifications Manuals) {1290}
2001/06/01 Change to the Torque of the Adjusting Screw Locknut for the Unit Injector (Testing and Adjusting Manuals) {1290}
Electronic Modular Control Panel II+ (EMCP II+) Shutdown Mode - PEEC and EUI Engines
Electronic Modular Control Panel II+ (EMCP II+) Shutdown Mode - MUI Engines
3034 Marine Engine Basic Engine
3500B and 3500B High Displacement Generator Set Engines Electronic Display Module
3034 Marine Engine General Information
G3600 Engines Air Lines - Air Choke with VTC Turbocharger
3034 Marine Engine Cooling System
2001/06/01 Change to the Torque of the Adjusting Screw Locknut for the Unit Injector (Specifications Manuals) {1290}
G3600 Engines Procedure for Engine Timing