Water Temperature Regulator
Show/hide table
Illustration 1 | g03266157 |
Show/hide table
Specifications for 142-9675 Water Temperature Regulator     | |||
Item     | Qty     | Part     | Specification Description     |
-     | -     | -     | Start to open temperature is 109 °C (228 °F).     |
-     | -     | -     | Fully open temperature is 120 °C (248 °F).     |
A     | -     | -     | Minimum opening distance at 120 °C (248 °F) is 9.5 mm (0.37 inch).     |
Caterpillar Information System:
120H and 135H Motor Graders Alternate Exit
G3600 Engines Engine Speed/Timing Sensor - Clean/Inspect
3054 and 3056 Industrial and Generator Set Engines Fuel System - Prime
3034 Marine Engine - Installation Guide Engine Mounting
3500B and 3500B High Displacement Generator Set Engines Engine Control Switch (ECS) (EMCP II)
Electronic Modular Control Panel II+ (EMCP II+) Instrument Panel
3054, 3054B and 3056 Marine Engines Fuel Injection Pump - Install - Delphi
3054, 3054B and 3056 Marine Engines Fuel Injection Pump - Remove - Delphi
3054, 3054B and 3056 Marine Engines Engine Oil Filter Base - Install - 3056 Engine
3054, 3054B and 3056 Marine Engines Engine Oil Filter Base - Remove - 3056 Engines
3054, 3054B and 3056 Marine Engines Engine Oil Filter Base - Install - 3054 and 3054B Engines
3054, 3054B and 3056 Marine Engines Engine Oil Filter Base - Remove - 3054 and 3054B Engines
3512B Marine Auxiliary Engine System Overview
Electronic Modular Control Panel II+ (EMCP II+) Starting Motor Magnetic Switch - Test
3054, 3054B and 3056 Marine Engines Heat Exchanger - Remove - 3054 and 3054B Engines
3034 Marine Engine Fuel System Secondary Filter - Replace
Electronic Modular Control Panel II (EMCP II) GSC CID 0441 - FMI 12 (for MUI Engines)
797 Off-Highway Truck Power Train Final Drive - Assemble
3054, 3054B and 3056 Marine Engines Heat Exchanger - Install - 3054 and 3054B Engines
3054, 3054B and 3056 Marine Engines Heat Exchanger - Disassemble - 3054 and 3054B Engines
3054, 3054B and 3056 Marine Engines Heat Exchanger - Assemble - 3054 and 3054B Engines
2001/07/01 New Hydrax Electronic Control Is Available {1900}
EMCPII+ for Gas Engines Starting Motor Magnetic Switch - Test - 3500 Engines Only
2001/06/01 Change to the Torque of the Adjusting Screw Locknut for the Unit Injector (Specifications Manuals) {1290}