Engine Oil Level - Check
Show/hide table
Hot oil and hot components can cause personal injury. Do not allow hot oil or hot components to contact the skin. |
Show/hide table
Illustration 1 | g00771169 |
(1) Oil level gauge
(2) Oil filler cap |
Show/hide table
Illustration 2 | g00110310 |
(Y) "ADD" mark
(X) "FULL" mark |
Show/hide table
NOTICE |
---|
Perform this maintenance with the engine stopped. |
- Maintain the oil level between "ADD" mark (Y) and "FULL" mark (X) on oil level gauge (1). Do not fill the crankcase above "FULL" mark (X).
Show/hide table
NOTICE Operating your engine when the oil level is above the "FULL" mark could cause your crankshaft to dip into the oil. The air bubbles created from the crankshaft dipping into the oil reduces the oil's lubricating characteristics and could result in the loss of power.
- Remove the oil filler cap and add oil, if necessary. Clean the oil filler cap. Install the oil filler cap.
Caterpillar Information System:
3126B and 3126E On-highway Engines Speed/Timing Sensor - Remove and Install
3406E Marine Engine Marine Transmission Oil Cooler Core - Remove and Install
315C Excavator Boom and Stick Linkage - Lubricate
3126B and 3126E On-highway Engines Engine Oil Temperature Sensor - Remove and Install
C-9 Engines for Caterpillar Built Machines General Information
3126B and 3126E On-highway Engines Boost Pressure Sensor - Remove and Install
3406E Marine Engine Engine Oil Cooler - Assemble
3306B-XQ200 Rental Generator Set Engine Enclosure - Inspect
3500B and 3500B High Displacement Engines for Caterpillar Built Generator Sets Electronic Display Module
3126B and 3126E On-highway Engines Service Brake Pedal Position (Switch 2) Circuit - Test
3500B and 3500B High Displacement Engines for Caterpillar Built Generator Sets Engine Speed/Timing Sensor - Calibrate
3406E and C15 Marine Engines Engine Oil Cooler - Disassemble
3406E Marine Engine Marine Transmission Oil Cooler - Remove and Install
PM3516 Power Modules Product Storage
3126B and 3126E On-highway Engines Atmospheric Pressure Sensor - Remove and Install
3126B and 3126E On-highway Engines Inlet Air Temperature Sensor - Remove and Install
3304B-XQ125 Rental Generator Set Reference Material
C-9 Engines for Caterpillar Built Machines Basic Engine
C-9 Industrial Engine Gear Group (Front) - Time
2001/02/01 New Cylinder Head Groups Will Provide Improved Reliability {1100, 1103, 1104}
2001/09/01 New Cylinder Head Groups Provide Increased Valve Life {1100, 1103, 1104}
3406E Marine Engine Exhaust Manifold - Remove and Install
3304B-XQ125 Rental Generator Set Electric Starting
3406E Marine Engine Engine Lifting Bracket - Remove and Install