Cylinder Head Grounding Stud - Inspect/Clean/Tighten
Show/hide table
图 1 | g00768411 |
典型实例 |
检查原始设备制造商线束连接和状况是否良好。
电气接地柱头螺栓必须具备连接到与蓄电池的接地线。 每一次换机油时要拧紧电气接地柱头螺栓。 接地线和接地带应共同连接到发动机接地点。 所有接地点必须紧固和无腐蚀现象。
- 如果连接处被腐蚀,使用烘焙苏打和水的溶液清洁连接处。
- 保持电气接地柱头螺栓和接地带清洁,并用多用途含钼锂基润滑脂(MPGM)或石油冻涂覆。
Caterpillar Information System:
3500 Generator Set Engines Turbocharger
3500 Generator Sets Speed Sensor - Clean/Inspect
3126B and 3126E On-highway Engines Neutral Switch Circuit - Test
G3612 and G3616 Engines Welding on Engines with Electronic Controls
G3516B and G3520B Generator Set Engines Exhaust Elbow - Remove and Install
PM3500 Power Modules Specifications
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Fuel Injection Nozzles - Install - 3013, 3014 and 3024 Engines
3508, 3512, and 3516 Generator Sets Product Description
3508, 3512, and 3516 Generator Sets Model View Illustrations
2001/02/01 Complete Engine Control Panels For 3600 Diesel Engines Will Not Be Serviced At The Upper Group Level {7490}
G3516B and G3520B Generator Set Engines Carburetor - Install
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications Accumulator (Pilot)
330C Excavator Engine Crankcase Breather - Clean
3524B Engines for 797 and 797B Off-Highway Trucks Cylinder Heads
3126B and 3126E Truck Engine Air Inlet and Exhaust System - Inspect
HT400 Pumper Belt - Inspect
3500 Generator Set Engines Engine Oil Pressure - Test
G3516B and G3520B Generator Set Engines Turbocharger - Remove
3126B and 3126E On-highway Engines PTO Shutdown Timer - Test
Marine Monitoring System II Signal Listing
3126E Engine for Combat and Tactical Vehicles PTO Switch Circuit - Test
C-9 Industrial Engine Diagnostic Flash Code Retrieval
C-9 Industrial Engine Sensors and Electrical Components
3306B-XQ200 Rental Generator Set Engine Cold Weather Starting