G3516B and G3520B Generator Set Engines Caterpillar


Carburetor - Install

Usage:

G3516B 7EZ

Installation Procedure


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.




    Illustration 1g00767577

  1. Put gasket (12) on the elbow.


    Illustration 2g00767417

  2. Put carburetor (11) in position and install four nuts (9).

  3. Slide hose (10) in position on tube assembly (6) and carburetor (11). Install clamps (7).

  4. Install gasket (8).


    Illustration 3g00767574

  5. Install three U-bolts (5) on the tube assembly.


    Illustration 4g00767419

  6. Put tube (3) in position and install four nuts (4).

  7. Put elbow (2) in position and install clamps (1).

Caterpillar Information System:

330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications Accumulator (Pilot)
2001/01/01 Improvements to Caterpillar's Gasket Kits for Engines {7555}
3500B Generator Sets Manual Stop Procedure
2001/01/01 Improvements to Caterpillar's Gasket Kits for Engines {7555}
3126B and 3126E On-highway Engines Ignore Brake/Clutch Switch Circuit - Test
G3516B and G3520B Generator Set Engines Carburetor - Remove
2001/01/01 New Exhaust Sleeve Assembly {1059}
3512B HD SR500 Generator Sets After Stopping Engine
3512B SR4B Generator Sets Fuel Conservation Practices
3512B SR4B Generator Sets Engine Operation
3512B HD SR500 Generator Sets After Starting Engine
PM3516 Power Modules Starting the Engine
2001/02/01 Complete Engine Control Panels For 3600 Diesel Engines Will Not Be Serviced At The Upper Group Level {7490}
3508, 3512, and 3516 Generator Sets Model View Illustrations
3508, 3512, and 3516 Generator Sets Product Description
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Fuel Injection Nozzles - Install - 3013, 3014 and 3024 Engines
PM3500 Power Modules Specifications
G3516B and G3520B Generator Set Engines Exhaust Elbow - Remove and Install
G3612 and G3616 Engines Welding on Engines with Electronic Controls
3126B and 3126E On-highway Engines Neutral Switch Circuit - Test
3500 Generator Sets Speed Sensor - Clean/Inspect
3500 Generator Set Engines Turbocharger
C-9 Industrial Engine Cylinder Head Grounding Stud - Inspect/Clean/Tighten
330C Excavator Engine Crankcase Breather - Clean
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.