G3612 and G3616 Engines Caterpillar


Welding on Engines with Electronic Controls

Usage:

G3612 1YG


注意

由于机架的强度可能会降低,一些制造厂商建议不要在机架或纵轨上进行焊接。 有关在机架或纵轨上焊接的问题,请向原始设备制造商(OEM)或卡特彼勒代理商咨询。


为了防止损坏电控装置,根据需要正确进行焊接步骤。 在具有电控装置的设备上焊接前,检查下列防范措施:

  1. 关掉发动机。 将发动机操控开关置于关闭(OFF)位置。

  1. 如果发动机具有蓄电池切断开关,则开关应处于断开位置。 否则,要从设备的蓄电池上断开蓄电池的负极"-"电缆。


    注意

    不要将电焊机的地线接至电气部件如电子控制模块(ECM)或传感器上。 不正确的接地方式能对传动系轴承、液压元件、电气部件和其它部件造成损坏。

    用焊接机的地线夹子夹住要焊接的组件。 尽可能将夹子置于焊接点附近。 这将有助于减少损坏的可能性。


  1. 用焊接机的地线夹子夹住要焊接的组件。 尽可能将夹子置于焊接点附近。

  1. 保护线束不受焊接碎屑和飞溅物的损害。 按正确的焊接步骤焊接。

Caterpillar Information System:

G3516B and G3520B Generator Set Engines Exhaust Elbow - Remove and Install
PM3500 Power Modules Specifications
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Fuel Injection Nozzles - Install - 3013, 3014 and 3024 Engines
3508, 3512, and 3516 Generator Sets Product Description
3508, 3512, and 3516 Generator Sets Model View Illustrations
2001/02/01 Complete Engine Control Panels For 3600 Diesel Engines Will Not Be Serviced At The Upper Group Level {7490}
G3516B and G3520B Generator Set Engines Carburetor - Install
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications Accumulator (Pilot)
2001/01/01 Improvements to Caterpillar's Gasket Kits for Engines {7555}
3500B Generator Sets Manual Stop Procedure
2001/01/01 Improvements to Caterpillar's Gasket Kits for Engines {7555}
3126B and 3126E On-highway Engines Ignore Brake/Clutch Switch Circuit - Test
3126B and 3126E On-highway Engines Neutral Switch Circuit - Test
3500 Generator Sets Speed Sensor - Clean/Inspect
3500 Generator Set Engines Turbocharger
C-9 Industrial Engine Cylinder Head Grounding Stud - Inspect/Clean/Tighten
330C Excavator Engine Crankcase Breather - Clean
3524B Engines for 797 and 797B Off-Highway Trucks Cylinder Heads
3126B and 3126E Truck Engine Air Inlet and Exhaust System - Inspect
HT400 Pumper Belt - Inspect
3500 Generator Set Engines Engine Oil Pressure - Test
G3516B and G3520B Generator Set Engines Turbocharger - Remove
3126B and 3126E On-highway Engines PTO Shutdown Timer - Test
Marine Monitoring System II Signal Listing
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.