Configuration Record
Show/hide table
| Configuration for Optional Output Alarms | |
|---|---|
| Description | Output Number (0-64) |
| "Lube Oil To Engine Temperature High Alarm" | |
| "Lube Oil To Engine Pressure Low Alarm" | |
| "Lube Oil To Engine Pressure Low Shutdown" | |
| "Lube Oil To Filter Pressure High Alarm" | |
| "Inlet Air Manifold Temperature High Alarm" | |
| "Inlet Air Manifold Pressure High Alarm" | |
| "Fuel To Engine Temperature High Alarm" | |
| "Fuel To Engine Pressure Low Alarm" | |
| "Jacket Water Outlet Temperature High Alarm" | |
| "Jacket Water Outlet Temperature High Shutdown" | |
| "Redundant Jacket Water Temperature High Shutdown" | |
| "Jacket Water Inlet Pressure Low Alarm" | |
| "AC/OC Inlet Temperature High Alarm" | |
| "AC/OC Pump Pressure Low Alarm" | |
| "Raw Water Pressure Low Alarm" | |
| "Customer Temp1 Alarm" | |
| "Customer Temp1 Shutdown" | |
| "Customer Temp2 Alarm" | |
| "Customer Temp2 Shutdown" | |
| "Customer Auxiliary 4-20 mA #1 Alarm" | |
| "Customer Auxiliary 4-20 mA #1 Shutdown" | |
| "Customer Auxiliary 4-20 mA #2 Alarm" | |
| "Customer Auxiliary 4-20 mA #2 Shutdown" | |
| "Air Start Pressure Low Alarm" | |
| "Non-Drive Bearing Temperature High Alarm" | |
| "Non-Drive Bearing Temperature High Shutdown" | |
| "Drive Bearing Temperature High Alarm" | |
| "Drive Bearing Temperature High Shutdown" | |
| "Stator A Temperature High Alarm" | |
| "Stator B Temperature High Alarm" | |
| "Stator C Temperature High Alarm" | |
| "Turbine Inlet Left/Inline Temp High Alarm" | |
| "Turbine Inlet Right Temperature High Alarm" | |
| "Turbine Outlet Left/Inline Temp High Alarm" | |
| "Turbine Outlet Right Temperature High Alarm" | |
| "Exhaust Port #1 Temperature High Alarm" | |
| "Exhaust Port #2 Temperature High Alarm" | |
| "Exhaust Port #3 Temperature High Alarm" | |
| "Exhaust Port #4 Temperature High Alarm" | |
| "Exhaust Port #5 Temperature High Alarm" | |
| "Exhaust Port #6 Temperature High Alarm" | |
| "Exhaust Port #7 Temperature High Alarm" | |
| "Exhaust Port #8 Temperature High Alarm" | |
| "Exhaust Port #9 Temperature High Alarm" | |
| "Exhaust Port #9 Temperature High Alarm" | |
| "Exhaust Port #11 Temperature High Alarm" | |
| "Exhaust Port #12 Temperature High Alarm" | |
| "Exhaust Port #13 Temperature High Alarm" | |
| "Exhaust Port #14 Temperature High Alarm" | |
| "Exhaust Port #15 Temperature High Alarm" | |
| "Exhaust Port #16 Temperature High Alarm" | |
| "Turbine Left/Inline Overspeed" | |
| "Turbine Right Overspeed" | |
| "Engine Overspeed" | |
| "Exhaust Port #1 Deviation Alarm" | |
| "Exhaust Port #2 Deviation Alarm" | |
| "Exhaust Port #3 Deviation Alarm" | |
| "Exhaust Port #4 Deviation Alarm" | |
| "Exhaust Port #5 Deviation Alarm" | |
| "Exhaust Port #6 Deviation Alarm" | |
| "Exhaust Port #7 Deviation Alarm" | |
| "Exhaust Port #8 Deviation Alarm" | |
| "Exhaust Port #9 Deviation Alarm" | |
| "Exhaust Port #10 Deviation Alarm" | |
| "Exhaust Port #11 Deviation Alarm" | |
| "Exhaust Port #12 Deviation Alarm" | |
| "Exhaust Port #13 Deviation Alarm" | |
| "Exhaust Port #14 Deviation Alarm" | |
| "Exhaust Port #15 Deviation Alarm" | |
| "Exhaust Port #16 Deviation Alarm" | |
| "Fuel Filter Pressure Differential Alarm" | |
| "Lube Oil Filter Pressure Differential Alarm" | |
| "Low Speed Low Oil Pressure Contactor Shutdown" | |
| "High Speed Low Oil Pressure Contactor Shutdown" | |
| "Crankcase Pressure High Contactor Shutdown" | |
| "Customer Shutdown" | |
| "ESS Crank Terminate Alarm" | |
| "ESS Crank Terminate Time Delay Alarm" | |
| "ESS Oil Step Alarm" | |
| "Oil Level Low Contactor Alarm" | |
| "Particle Detector Alarm" | |
| "Particle Detector Shutdown" | |
| "Water Level Low Contactor Alarm" | |
| "Customer Alarm1 Alarm" | |
| "Customer Alarm2 Alarm" | |
| "Customer Alarm3 Alarm" | |
| "Customer Shutdown1 Shutdown" | |
| "Customer Shutdown2 Shutdown" | |
| "Low Battery Low Alarm" | |
| "Jacket Water Detector Alarm" | |
| "Oil Mist Detector Shutdown" | |
| "Relay Power Not Available Alarm" | |
| "Emergency Stop Shutdown" | |
Show/hide table
| Engine Configuration | |
|---|---|
| Device | Setting (X or Value used) |
| "Front Mount Turbo" | |
| "Rear Mount Turbo" | |
| "Turbine Speed Sensor" | |
| "Combined Cooling Circuit" | |
| "Separate Cooling Circuit" | |
| "Raw Water Pressure " | |
| "Fuel Rack Position" | |
| "Oil Mist Detector" | |
| "Redundant Jacket Water Temperature" | |
| "Rear Mount Generator" | |
| "Power Monitor" | |
| "Forward Acting Actuator" | |
| "Optional Alarms #1" | |
| "Optional Alarms #2" | |
| "Modbus Communications" | |
| "Rated Speed" | RPM |
| "Turbine Speed" | RPM |
Show/hide table
| Configuration of the Auxiliary Inputs | |
|---|---|
| Auxiliary Input | Definition |
| "Auxiliary Alarm #1 (Normally Closed)" | |
| "Auxiliary Alarm #2 (Normally Closed)" | |
| "Auxiliary Alarm #3 (Normally Open)" | |
| "Auxiliary Shutdown #1 (Normally Open)" | |
| "Auxiliary Shutdown #2 (Normally Closed)" | |
| "Auxiliary Temperature #1" | |
| "Auxiliary Temperature #2" | |
| "Auxiliary 4-20mA Input #1" | |
| "Auxiliary 4-20mA Input #2" | |
Show/hide table
| Configuration of the Programmable Outputs | |
|---|---|
| Description | Output (1-4) |
| "Fuel Rack Position" | |
| "Lube Oil To Engine Temperature" | |
| "Lube Oil To Engine Pressure" | |
| "Lube Oil To Filter Pressure" | |
| "Inlet Air Manifold Temperature" | |
| "Inlet Air Manifold Pressure" | |
| "Fuel To Engine Temperature" | |
| "Fuel To Engine Pressure" | |
| "Fuel To Filter Pressure" | |
| "Jacket Water Outlet Temperature" | |
| "Redundant Jacket Water Outlet Temperature" | |
| "Jacket Water Inlet Pressure" | |
| "AC/OC Water Inlet Temperature" | |
| "AC/OC Pump Pressure" | |
| "Raw Water Pressure" | |
| "Customer Temp1 Alarm" | |
| "Customer Temp2 Alarm" | |
| "Customer Auxiliary 4-20 mA #1 Alarm" | |
| "Customer Auxiliary 4-20 mA #2 Alarm" | |
| "Air Start Pressure" | |
| "Generator Non-Drive Bearing Temperature" | |
| "Generator Drive Bearing Temperature" | |
| "Generator Stator A Temperature" | |
| "Generator Stator B Temperature" | |
| "Generator Stator C Temperature" | |
| "Turbine Inlet Left/Inline Temperature" | |
| "Turbine Inlet Right Temperature" | |
| "Turbine Outlet Left/Inline Temperature" | |
| "Turbine Outlet Right Temperature" | |
| "Exhaust Port #1 Temperature" | |
| "Exhaust Port #2 Temperature" | |
| "Exhaust Port #3 Temperature" | |
| "Exhaust Port #4 Temperature" | |
| "Exhaust Port #5 Temperature" | |
| "Exhaust Port #6 Temperature" | |
| "Exhaust Port #7 Temperature" | |
| "Exhaust Port #8 Temperature" | |
| "Exhaust Port #9 Temperature" | |
| "Exhaust Port #10 Temperature" | |
| "Exhaust Port #11 Temperature" | |
| "Exhaust Port #12 Temperature" | |
| "Exhaust Port #13 Temperature" | |
| "Exhaust Port #14 Temperature" | |
| "Exhaust Port #15 Temperature" | |
| "Exhaust Port #16 Temperature" | |
| "Turbine Left/Inline Speed" | |
| "Turbine Right Speed" | |
| "Engine Speed" | |
Show/hide table
| Configuration of the Modbus | |||
| Port 1 Configuration | Value | Port 2 Configuration | Value |
| "Address" | "Address" | ||
| "RTS Off Delay" | ms | "RTS Off Delay" | ms |
| "RTS to TXD Delay" | ms | "RTS to TXD Delay" | ms |
| "Baud Rate" | "Baud Rate" | ||
| "Parity" | "Parity" | ||
| "Stop Bits" | "Stop Bits" | ||
Show/hide table
| PM 3000 Configuration | |
|---|---|
| Type of CT Circuit | Select Circuit |
| "Delta, 3 CT's" | |
| "Delta, 2 CT's" | |
| "Direct Delta, 3 CT's" | |
| "Direct Delta, 2 CT's" | |
| "Open Delta, 3 CT's" | |
| "Open Delta, 2 CT's" | |
| "WYE" | |
| PT/CT Voltages and Currents | Value |
| "Primary PT Voltage" | V |
| "Secondary PT Voltage" | V |
| "Primary CT Current" | Amp |
| "Secondary CT Current" | Amp |
| "Neutral CT Primary" | Amp |
| "Neutral CT Secondary" | Amp |
Caterpillar Information System:
3054, 3054B and 3056 Marine Engines Engine Oil Cooler - Remove and Install - 3056 Engine
325D and 329D Excavators Work Tool Control (One-Way Flow) - If Equipped
3054, 3054B and 3056 Marine Engines Air Inlet Heater - Remove and Install
C-10, C-12, C-15 and C-16 Industrial Engines Ether Injection System - Test
3054 and 3056 Marine Generator Set Engines Engine Oil Relief Valve - Remove and Install
320C Excavator Plate Locations and Film Locations
3126B Marine Engine Basic Engine
2000/11/01 A New Seal Is Used In The Alternator Mounting Group {1405}
3126B Marine Engine Water Pump - Test
3126B Marine Engine Air Inlet and Exhaust System - Inspect
3054, 3054B and 3056 Marine Engines Safety Signs and Labels
3126B Marine Engine Turbocharger - Inspect
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Cylinder Head
3406E and 3456 Engines for Caterpillar Built Machines Cylinder Head Valves
Marine Monitoring System II RSView Software for Optional Computer
G3304 and G3306 Engines Flywheel Housing - Inspect
3500B Industrial Engines Customer Parameters Worksheet
3406E and 3456 Engines for Caterpillar Built Machines Camshaft
2000/11/01 Correction to Systems Operation Section, SENR5398-02, Data Link {4490}
3500B Industrial Engines Intermediate Speed Switch
C0.5, C0.7, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Stopping the Engine
3500B Industrial Engines Overspeed Verify Switch
3500B Industrial Engines Emergency Stopping
3054 and 3056 Marine Generator Set Engines Auxiliary Water Pump - Disassemble