Stopping the Engine
Show/hide table
| 注意 |
|---|
|
发动机带负荷运转后立即停机会引起过热并加快发动机零部件的磨损。 如果发动机已在高速和/或大负荷下持续运转过，使发动机停机之前，至少在低怠速运转发动机3分钟以降低和稳定发动机内部温度。 避免发动机热态停机可增加涡轮增压器轴和轴承的寿命。 |
停止在低负荷运转的发动机之前，以低怠速运转发动机30秒钟。 如果发动机一直在高转速和/或高负荷运转，停机前以低怠速运转发动机至少3分钟。 此步骤将使发动机内部温度得以降低和稳定下来。
确保已了解了发动机的停机步骤。 停机应按照发动机上安装的停机系统或参阅原始设备制造商提供的说明来进行。
- 为停止发动机，应将起动钥匙开关转到断电(OFF)位置。
Caterpillar Information System:
3126B and 3126E Truck Engines Engine Oil Temperature Sensor
G3408 and G3412 Engines Exhaust Manifold - Water Cooled
3608 Engine Specifications
3114, 3116, and 3126 Engines for Caterpillar Built Machines Fuel Transfer Pump - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines Fuel Transfer Pump - Install
G3408 and G3412 Engines Cylinder Head
G3408C and G3412C Engines Cylinder Head
3126B Industrial Engine Alternator and Regulator
C9 Engines for Caterpillar Built Machines Crankcase Breather - Remove and Install
2001/04/01 New Two-Stage Choke Assembly Linkage Is Introduced {1071}
G3408C and G3412C Engines Valve Mechanism
3126B Industrial Engine Front Housing and Covers
C9 Engine For Caterpillar Built Machines Cylinder Block Cover - Remove and Install
3500B Industrial Engines Engine Sensor Open/Short Test
3054, 3054B and 3056 Marine Engines Aftercooler - Disassemble
3608 Engine Tools
G3408 and G3412 Engines Valve Cover
320E and 323E Excavators VA Boom Controls - If Equipped
3054, 3054B and 3056 Marine Engines Aftercooler - Assemble
C9 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Disassemble
2001/06/01 A New Rubber Boot Is Available To Help Protect The Actuator Shafts In The Hydrax System {1716}
3126B Industrial Engine Reference Material
2001/01/01 New Spark Plugs Are Available {1555}
3500B Industrial Engines Aftercooler Coolant Temperature Sensor