Exhaust Manifold - Water Cooled
Show/hide table
Illustration 1 | g02704256 |
Rear view of engine |
Show/hide table
Specification for 105-4666 Exhaust Manifold Gp | |||
Item | Qty | Part | Specification Description |
1 | 4 | 6L-8562 Taperlock Stud | Torque to |
2 | 1 | 1D-4706 Bolt | Torque to |
3 | 8 | 5K-5959 O-Ring Seal | Lubricate the bore lightly with 5P-3975 Rubber Lubricant. |
4 | 4 | 7L-0520 Taperlock Stud | Torque to |
5 | 5 | 9S-8752 Full Nut | Before assembly, lubricate the threads and the bearing surfaces with Loctite C5A Copper Anti-Seize. |
6 | 1 | 6L-4428 Taperlock Stud | Before assembly, apply blue Loctite 242 to the threads. |
Torque to |
|||
7 | 2 | 4N-5073 Elbow | Be certain that the cup plug must be removed in each cylinder head before the elbows are connected. |
Show/hide table
Illustration 2 | g02704298 |
Left side view of engine (11) Tightening sequence |
Show/hide table
Specification for 105-4666 Exhaust Manifold Gp | |||
Item | Qty | Part | Specification Description |
8 | 12 | 012-7950 Plug | Before assembly, lubricate the threads and the bearing surfaces with Loctite C5A Copper Anti-Seize. |
9 | 24 | 106-1792 Taperlock Stud | Torque to |
10 | 24 | 168-7800 Locknut | Before assembly, lubricate the threads and the bearing surfaces with Loctite C5A Copper Anti-Seize. |
Tighten the locknut to a torque of |
Caterpillar Information System:
3608 Engine Specifications
3114, 3116, and 3126 Engines for Caterpillar Built Machines Fuel Transfer Pump - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines Fuel Transfer Pump - Install
G3408 and G3412 Engines Cylinder Head
G3408C and G3412C Engines Cylinder Head
3126B Industrial Engine Alternator and Regulator
C9 Engines for Caterpillar Built Machines Crankcase Breather - Remove and Install
2001/04/01 New Two-Stage Choke Assembly Linkage Is Introduced {1071}
G3408C and G3412C Engines Valve Mechanism
3126B Industrial Engine Front Housing and Covers
C9 Engine For Caterpillar Built Machines Fuel Pressure Sensor - Remove and Install
3054, 3054B and 3056 Marine Engines Aftercooler - Install
3126B and 3126E Truck Engines Engine Oil Temperature Sensor
3054E and 3056E Industrial Engines Stopping the Engine
C9 Engine For Caterpillar Built Machines Cylinder Block Cover - Remove and Install
3500B Industrial Engines Engine Sensor Open/Short Test
3054, 3054B and 3056 Marine Engines Aftercooler - Disassemble
3608 Engine Tools
G3408 and G3412 Engines Valve Cover
320E and 323E Excavators VA Boom Controls - If Equipped
3054, 3054B and 3056 Marine Engines Aftercooler - Assemble
C9 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Disassemble
2001/06/01 A New Rubber Boot Is Available To Help Protect The Actuator Shafts In The Hydrax System {1716}
3126B Industrial Engine Reference Material