Specifications
Show/hide table
3608 Engine Specifications | ||||
---|---|---|---|---|
Operating rpm | 900 | |||
Low idle rpm | 450 | |||
Cylinders and arrangement | 8 cylinders
In-line |
|||
Bore | |
|||
Stroke | |
|||
Displacement per cylinder | |
|||
Total displacement | |
|||
Compression ratio | 13:1 | |||
Aspiration | TA | |||
Rotation (flywheel end) | Clockwise | |||
Fuel Delivery | Unit Injectors | |||
Fuel | See this Operation and Maintenance Manual, "Fuel Specifications" (Maintenance Section). | |||
Method of starting | Air starting motors | |||
Maximum allowable exhaust back pressure | |
|||
Maximum allowable inlet air restriction | |
|||
Inlet valve lash | |
|||
Exhaust valve lash | |
Show/hide table
Illustration 1 | g00748328 |
3608 Engine design (A) Exhaust valves (B) Inlet valves (C) Flywheel |
Caterpillar Information System:
3114, 3116, and 3126 Engines for Caterpillar Built Machines Fuel Transfer Pump - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines Fuel Transfer Pump - Install
G3408 and G3412 Engines Cylinder Head
G3408C and G3412C Engines Cylinder Head
3126B Industrial Engine Alternator and Regulator
C9 Engines for Caterpillar Built Machines Crankcase Breather - Remove and Install
2001/04/01 New Two-Stage Choke Assembly Linkage Is Introduced {1071}
G3408C and G3412C Engines Valve Mechanism
3126B Industrial Engine Front Housing and Covers
C9 Engine For Caterpillar Built Machines Fuel Pressure Sensor - Remove and Install
3054, 3054B and 3056 Marine Engines Aftercooler - Install
3126B Industrial Engine Fan Drive
G3408 and G3412 Engines Exhaust Manifold - Water Cooled
3126B and 3126E Truck Engines Engine Oil Temperature Sensor
3054E and 3056E Industrial Engines Stopping the Engine
C9 Engine For Caterpillar Built Machines Cylinder Block Cover - Remove and Install
3500B Industrial Engines Engine Sensor Open/Short Test
3054, 3054B and 3056 Marine Engines Aftercooler - Disassemble
3608 Engine Tools
G3408 and G3412 Engines Valve Cover
320E and 323E Excavators VA Boom Controls - If Equipped
3054, 3054B and 3056 Marine Engines Aftercooler - Assemble
C9 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Disassemble
2001/06/01 A New Rubber Boot Is Available To Help Protect The Actuator Shafts In The Hydrax System {1716}