Pistons and Connecting Rods - Disassemble
解体步骤
Show/hide table
需要的工具     | |||
工具     | 零件号     | 零件说明     | 数量     |
A     | 4C-3601     | 活塞环扩张器     | 1     |
B     | 1P-1861     | 挡圈钳     | 1     |
开始:
- 拆下活塞和连杆。 请参阅解体和组装, "活塞和连杆 - 拆卸"。
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 使用工具 (B) ,从活塞裙部 (2) 上拆下挡圈 (3) 。
Show/hide table
图 1 | g01139072 |
Show/hide table
图 2 | g01139074 |
注: 此发动机配备裂解式连杆。 必须小心处理裂解式连杆。 松开连杆盖螺栓时使用一个软口台钳,固定连杆。
- 从连杆 (1) 上拆下活塞销 (4) 并分离活塞裙部 (2) 和活塞冠部 (6) 。
- 检查活塞头 (6) 中的轴承 (7) 。
- 使用工具 (A) ,拆下活塞环 (5) 。
- 沿长度 (X) 加热连杆 (1) 。 长 (X) 最大尺寸为 83.0 mm (3.27 in)。
Show/hide table
图 3 | g01139053 |
Show/hide table
注意 |
---|
在安装活塞销子轴承的时候,必须对连杆进行加热处理。 不要使用明火加热。 |
- 拆下旧轴承 (8) ,同时安装新轴承 (8) 。
- 轴承接头必须在箭头所示位置之一的 5 度以内。
Caterpillar Information System:
3054, 3054B and 3056 Marine Engines Aftercooler - Assemble
320E and 323E Excavators VA Boom Controls - If Equipped
G3408 and G3412 Engines Valve Cover
3608 Engine Tools
3054, 3054B and 3056 Marine Engines Aftercooler - Disassemble
3500B Industrial Engines Engine Sensor Open/Short Test
C9 Engine For Caterpillar Built Machines Cylinder Block Cover - Remove and Install
3054E and 3056E Industrial Engines Stopping the Engine
3126B and 3126E Truck Engines Engine Oil Temperature Sensor
G3408 and G3412 Engines Exhaust Manifold - Water Cooled
3608 Engine Specifications
3114, 3116, and 3126 Engines for Caterpillar Built Machines Fuel Transfer Pump - Remove
2001/06/01 A New Rubber Boot Is Available To Help Protect The Actuator Shafts In The Hydrax System {1716}
3126B Industrial Engine Reference Material
2001/01/01 New Spark Plugs Are Available {1555}
3500B Industrial Engines Aftercooler Coolant Temperature Sensor
3500B Industrial Engines Ether Injection System
3500 Generator Set Engines Water Connection Group
3500 Industrial Engines Air Compressor
2000/11/01 Operator's Manual for Marine Power Display Now Available {7490}
2000/11/01 A New Valve Bridge Assembly Is Available For Engines Equipped With A Compression Brake {1119, 1121}
3408E and 3412E Engines for Caterpillar Built Machines Crankshaft
3408E and 3412E Engines for Caterpillar Built Machines Crankshaft
2000/10/01 New Components Provide Improved Data Communication On Marine Engine Displays {7450, 7451}