Engine Control Module - Remove and Install
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
Illustration 1 | g00745630 |
- Remove allen head screw from harness assemblies (2) and (3).
- Disconnect harness assemblies (2) and (3) from engine control module (1).
Show/hide table
Illustration 2 g01040297 - Disconnect hose assemblies (5) and (8) from engine control module (1).
- Remove bolt (6) and electrical ground strap (4) from engine control module (1).
- Remove remaining bolts (6). Remove engine control module (1).
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
Illustration 3 | g01040297 |
- Install bolts (6).
- Install bolt (6) and electrical ground strap (4) onto engine control module (1). Tighten bolts (6) to
25 ± 6 N·m (18 ± 4 lb ft) . - Connect hose assemblies (5) and (8) to engine control module (1).
Show/hide table
Illustration 4 g00745630 - Install harness assemblies (2) and (3) on engine control module (1).
Show/hide table
NOTICE Ensure connectors are properly aligned and seated before installing the allen screws. Do not over tighten the allen screws.
- Install allen head screws into harness assemblies (2) and (3). Tighten the allen head screws to a torque of
2.25 ± .25 N·m (20 ± 2.2 lb in) .
Caterpillar Information System:
3406E On-Highway Engine Crankshaft Rear Seal - Install
3618 Engine Metal Particle Detector - Inspect
2000/10/01 A New Cylinder Liner And A New Combustion Gasket Are Used {1216, 7555}
3054, 3054B and 3056 Marine Engines Air Cleaner - Remove and Install
3500B Industrial Engines Electrical Connectors and Functions
2000/11/01 New Turbochargers Are Now Available {1052}
3618 Engine Oil Mist Detector - Maintain
3116 On Highway Engines Pistons and Connecting Rods - Remove
3116 On Highway Engines Pistons and Connecting Rods - Disassemble
3054, 3054B and 3056 Marine Engines Water Temperature Regulator Housing - Remove and Install - 3056 Engine
3608 Engine Plate Locations and Film Locations
3618 Engine Specifications
3054, 3054B and 3056 Marine Engines Crankcase Breather - Remove and Install - 3056 Engine
3500B Industrial Engines Injector Solenoids
UPS 250, UPS 300, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supply Static Switch Module - Remove and Install
3500B Industrial Engines Prelubrication System
2000/10/01 A New Fuel Filter Element Assembly Has Been Released {1261}
G3406 Engines Cylinder Head Valves
2001/01/01 Watch Windows Standard Software Is Now Available {7620}
3618 Engine Hourly Performance Log
3618 Engine Daily Performance Log
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Fuel System - Prime
3406C Engines for Caterpillar Built Machines Water Pump
3054 and 3056 Marine Generator Set Engines Electric Starting Motor - Remove and Install