3500B Industrial Engines Caterpillar


Electrical Connectors and Functions

Usage:

3508B BPX

Table 1
Connector     Component    
J1/P1     Electronic Control Module    
J2/P2     Electronic Control Module    
J4/P4 - J19/P19     Electronic Unit Injector    
J20/P20     Primary Engine Speed/Timing Sensor    
J21/P21     Coolant Temperature Sensor    
J22/P22     Filtered Engine Oil Pressure Sensor    
J23/P23     Turbocharger Compressor Outlet Pressure Sensor    
J25/P25     Right Turbocharger Compressor Inlet Pressure Sensor    
J26/P26     Timing Calibration Connector    
J27/P27     Atmospheric Pressure Sensor    
J28/P28     Left Turbocharger Compressor Inlet Pressure Sensor    
J29/P29     Crankcase Pressure Sensor    
J30/P30     Left Exhaust Temperature Sensor    
J31/P31     Right Exhaust Temperature Sensor    
J32/P32     Aftercooler Temperature Sensor    
J35/P35     Engine Coolant Level Sensor    
J42/P42     Service Tool Connector    
J44/P44     Secondary Engine Speed/Timing Sensor    
J48/P48     Unfiltered Engine Oil Pressure Sensor    
J49/P49     Filtered Fuel Pressure Sensor    
J50/P50     Unfiltered Fuel Pressure Sensor    
J51/P51     Inlet Air Temperature Sensor
Engine Oil Temperature Sensor    
J53/P53     Optional Fuel Temperature Sensor    
J60/P60     CAN Data Link    



Illustration 1g00607248

Electronic Control Module




Illustration 2g00607253

ECM Connector




Illustration 3g00607231

ECM Connector




Illustration 4g00680848

3 Pin Electrical Connectors




Illustration 5g00680846

2 Pin Electrical Connectors

Caterpillar Information System:

2000/11/01 New Turbochargers Are Now Available {1052}
3618 Engine Oil Mist Detector - Maintain
3116 On Highway Engines Pistons and Connecting Rods - Remove
3116 On Highway Engines Pistons and Connecting Rods - Disassemble
3054, 3054B and 3056 Marine Engines Water Temperature Regulator Housing - Remove and Install - 3056 Engine
3608 Engine Plate Locations and Film Locations
3618 Engine Specifications
2000/10/01 New Jake Brake Housing {1119, 1129}
Electronic Modular Control Panel II (EMCP II) Starting Motor Magnetic Switch - Test - PEEC Engines Only
320D and 323D Excavators Machine System Specifications Pilot Valve (One Way)
Electronic Modular Control Panel II (EMCP II) Troubleshooting Dedicated Shutdown Indicators
C9 Engine For Caterpillar Built Machines Turbocharger - Remove
3054, 3054B and 3056 Marine Engines Air Cleaner - Remove and Install
2000/10/01 A New Cylinder Liner And A New Combustion Gasket Are Used {1216, 7555}
3618 Engine Metal Particle Detector - Inspect
3406E On-Highway Engine Crankshaft Rear Seal - Install
3406E Engine Engine Control Module - Remove and Install
3054, 3054B and 3056 Marine Engines Crankcase Breather - Remove and Install - 3056 Engine
3500B Industrial Engines Injector Solenoids
UPS 250, UPS 300, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supply Static Switch Module - Remove and Install
3500B Industrial Engines Prelubrication System
2000/10/01 A New Fuel Filter Element Assembly Has Been Released {1261}
G3406 Engines Cylinder Head Valves
2001/01/01 Watch Windows Standard Software Is Now Available {7620}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.