Number 11 LED is Blinking - Troubleshoot
This condition indicates that the ambient temperature is less than 0 °C (32 °F).
Indication of the Condition
Show/hide table
 | |
| Illustration 1 | g00738097 |
- The red number 11 LED is flashing.
- No other LED is illuminated.
Probable Causes
- The ventilation in the engine compartment is blowing cold air onto the detector.
Recommended Repairs
- Direct the air from the ventilation away from the detector.
- After the ventilation is redirected, press the "RESET" button.
Expected Result
The number 11 LED is no longer flashing. The detector is operating normally.
Results
OK - The detector is operating normally.
Not OK - Reset the system again. Troubleshoot any active faults.
Note: The number 12 LED is not used for faults. This is a spare indicator.
Caterpillar Information System:
G3304 and G3306 Engines Air Starting System Operation
3406E Engine Engine Oil Filter Base - Install - Engine without BrakeSaver
3126B Industrial Engine Model View Illustrations
G3406 Engine Camshaft
311B, 312B, 315B, 318B, 320B, 322B, 325B, 330B, 345B, 345B Series II, 365B and 385B Excavators Air Conditioning and Heating Blower Motor
G3406 Engine Crankshaft
G3406 Engine Pistons, Rings and Connecting Rods
3406E Engine Engine Oil Filter Base - Remove - Engine without BrakeSaver
G3406 Engine Cylinder Block, Liners and Heads
G3406 Engine Cooling System
Uninterruptible Power Supply (UPS) 250 Vibration Sensors Zeroes - Calibrate
Uninterruptible Power Supply (UPS) 250 Commutator Advance Setpoint - Calibrate
Oil Mist Detectors Number 10 LED is Blinking - Troubleshoot
C-10 and C-12 Engines Reference Material
Oil Mist Detectors Number 9 LED is Blinking - Troubleshoot
Oil Mist Detectors Number 8 LED is Blinking - Troubleshoot
C-9 Engines for Caterpillar Built Machines Cylinder Block Cover Group
Oil Mist Detectors Number 7 LED is Blinking - Troubleshoot
Oil Mist Detectors Number 5 LED is Blinking - Troubleshoot
Oil Mist Detectors Number 4 LED is Blinking - Troubleshoot
Oil Mist Detectors Number 3 LED and Number 2 LED are Blinking - Troubleshoot
EMCPII+ for Gas Engines Charging System
2000/09/01 New FLASH Files Are Now Available for 1998 Model Year C-10 and C-12 Truck Engines {1901, 7620}
C-10, C-12, C-15 and C-16 Industrial Engines Diagnostic Codes