3406E Engine Caterpillar


Engine Oil Filter Base - Install - Engine without BrakeSaver

Usage:

3406E 5EK

Installation Procedure

Table 1
Required Tools 
Tool  Part Number  Part Description  Qty 
2P-8250  Strap Wrench Assembly 


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.




    Illustration 1g00737879

  1. Ensure that the O-ring seals are in position on the engine oil filter base. Position oil filter base (6) on the engine oil cooler and the cylinder block.

  2. Install bolts (4) that hold the engine oil filter base to the cylinder block.

  3. Install nuts (5) that hold the engine oil filter base to the engine oil cooler.

  4. Connect tube assembly (3).


    Illustration 2g00737865

  5. Install plug (1).

  6. Install oil filter (2).

  7. Fill with engine oil.
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.