Number 13 LED is Blinking - Troubleshoot
This condition indicates that the infrared filters are dirty.
Indication of the Condition
Show/hide table
 | |
| Illustration 1 | g00737685 |
- The red number 13 LED is flashing.
- No other LED is illuminated.
Probable Causes
- The infrared filters are dirty.
- The electronic module is faulty.
Recommended Repairs
- Clean the infrared filters. For instructions, see the Systems Operation, "Maintenance Schedule".
- After the infrared filters are clean, press the "RESET" button.
Expected Result
The number 13 LED is no longer flashing. The detector is operating normally.
Results
OK - The detector is operating normally.
Not OK - The number 13 LED is still flashing.
Repair
The electronic module is probably faulty. Replace the electronic module. For instructions, see this Testing and Adjusting, "Repair Procedure" topic.
Caterpillar Information System:
SPP101 Skid Mounted Pumper Engine Description
3126B Industrial Engine Safety Signs and Labels
3126B Industrial Engines Poor Acceleration or Response
C-10, C-12, C-15 and C-16 Industrial Engines Intermittent Engine Shutdown
G3406 Engine Ignition System
C-10 and C-15 Petroleum Engines Low Power/Poor or No Response to Throttle
3508B Industrial Engine with an ADEM 2 Electronic Control Module System Overview
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers CID 0175 FMI 04 Engine Oil Temperature short to ground
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers CID 0175 FMI 03 Engine Oil Temperature open/short to +batt
C15 and C18 Petrolem Generator Set Engines Service Information Report
SPT343 Truck Mounted Pumper Fan Drive Bearing - Lubricate
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers CID 0164 FMI 03 Injector Actuation Pressure voltage high
G3406 Engine Lubrication System
Uninterruptible Power Supply (UPS) 250 Commutator Advance Setpoint - Calibrate
Uninterruptible Power Supply (UPS) 250 Vibration Sensors Zeroes - Calibrate
G3406 Engine Cooling System
G3406 Engine Cylinder Block, Liners and Heads
3406E Engine Engine Oil Filter Base - Remove - Engine without BrakeSaver
G3406 Engine Pistons, Rings and Connecting Rods
G3406 Engine Crankshaft
311B, 312B, 315B, 318B, 320B, 322B, 325B, 330B, 345B, 345B Series II, 365B and 385B Excavators Air Conditioning and Heating Blower Motor
G3406 Engine Camshaft
3126B Industrial Engine Model View Illustrations
3406E Engine Engine Oil Filter Base - Install - Engine without BrakeSaver