CID 0175 FMI 03 Engine Oil Temperature open/short to +batt
产生此代码的情况:
电子控制模块(ECM)已通电至少2秒钟。
ECM读取的该信号电压持续8秒钟超过4.92伏直流(VDC)电压。
系统响应:
ECM将会记录诊断编码。 诊断编码可在一个显示模块或卡特彼勒电子技师(ET)上观察到。 ECM将发动机机油温度标记为无效数据。 ECM将发动机机油温度设定为与冷却液温度相同的数值。 如果冷却液温度传感器也已经失效，则使用以下数值之一：
- 如果发动机正在运转的话，发动机机油温度将会被设定为65 °C (149 °F)。
- 如果发动机没在运转的话，发动机机油温度将会被设定为−10 °C (14 °F)。
- 无
测试步骤 1. 进行以下的诊断步骤: 发动机温度传感器开路或断路 - 测试
结果:
- 故障被排除 - 停止
Caterpillar Information System:
C15 and C18 Petrolem Generator Set Engines Service Information Report
SPT343 Truck Mounted Pumper Fan Drive Bearing - Lubricate
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers CID 0164 FMI 03 Injector Actuation Pressure voltage high
G3406 Engines Engine Design
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers CID 0164 FMI 00 High Injector Actuation Pressure
G3408C and G3412C Engines Cooling System
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers CID 0110 FMI 04 Engine Coolant Temperature short to ground
3306C Engines for Caterpillar Built Machines Compression - Test
3306C Engines for Caterpillar Built Machines Engine Oil Pump - Inspect
G3406 Engines Housing (Front)
3406C Truck Engine Air in Fuel
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers CID 0175 FMI 04 Engine Oil Temperature short to ground
3508B Industrial Engine with an ADEM 2 Electronic Control Module System Overview
C-10 and C-15 Petroleum Engines Low Power/Poor or No Response to Throttle
G3406 Engine Ignition System
C-10, C-12, C-15 and C-16 Industrial Engines Intermittent Engine Shutdown
3126B Industrial Engines Poor Acceleration or Response
3126B Industrial Engine Safety Signs and Labels
SPP101 Skid Mounted Pumper Engine Description
Oil Mist Detectors Number 13 LED is Blinking - Troubleshoot
G3406 Engine Lubrication System
Uninterruptible Power Supply (UPS) 250 Commutator Advance Setpoint - Calibrate
Uninterruptible Power Supply (UPS) 250 Vibration Sensors Zeroes - Calibrate