G3406 Engines Caterpillar


Engine Design

Usage:

G3406 1RK



Illustration 1g00284836

Cylinder and valve location

(A) Inlet valve

(B) Exhaust valve

Cylinders and arrangement ... In-line 6

Valves per cylinder ... 4

Displacement ... 14.6 L (893 cu in)

Bore ... 137 mm (5.4 inch)

Stroke ... 165 mm (6.5 inch)

Combustion ... Spark ignited

When the crankshaft is viewed from the flywheel end the crankshaft rotates in the following direction. ... Counterclockwise

Note: The front end of the engine is opposite the flywheel end. The left side and the right side of the engine are viewed from the flywheel end. The No. 1 cylinder is the front cylinder.

Caterpillar Information System:

C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers CID 0164 FMI 00 High Injector Actuation Pressure
G3408C and G3412C Engines Cooling System
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers CID 0110 FMI 04 Engine Coolant Temperature short to ground
3306C Engines for Caterpillar Built Machines Compression - Test
3306C Engines for Caterpillar Built Machines Engine Oil Pump - Inspect
G3406 Engines Housing (Front)
3406C Truck Engine Air in Fuel
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
G3406 Engines Valve Mechanism
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers CID 0094 FMI 04 Fuel Pressure short to ground
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers CID 0094 FMI 03 Fuel Pressure open/short to +batt
3500 Engines For Caterpillar Built Power Modules Starting Solenoid
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers CID 0164 FMI 03 Injector Actuation Pressure voltage high
SPT343 Truck Mounted Pumper Fan Drive Bearing - Lubricate
C15 and C18 Petrolem Generator Set Engines Service Information Report
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers CID 0175 FMI 03 Engine Oil Temperature open/short to +batt
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers CID 0175 FMI 04 Engine Oil Temperature short to ground
3508B Industrial Engine with an ADEM 2 Electronic Control Module System Overview
C-10 and C-15 Petroleum Engines Low Power/Poor or No Response to Throttle
G3406 Engine Ignition System
C-10, C-12, C-15 and C-16 Industrial Engines Intermittent Engine Shutdown
3126B Industrial Engines Poor Acceleration or Response
3126B Industrial Engine Safety Signs and Labels
SPP101 Skid Mounted Pumper Engine Description
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.