Remanufactured Stanadyne Fuel Injection Pumps are Available for 3054 and 3056 Engines {1251}
- Engine:
- 3056 (S/N: 1ML1-UP)
- 3054 (S/N: 5YS1-UP)
- 3054 (S/N: 6FK1-UP)
Remanufactured Stanadyne fuel injection pumps are now available for 3054 and 3056 Engines. The remanufactured fuel injection pumps provide a lower cost alternative for various applications.
Refer to Table 1 for availability. For additional information, contact the Reman Hot Line @ 1-888-88-REMAN (1-888-887-3626) with any questions or concerns you may have about the product.
Show/hide table
S/N     | Engine     | Fuel Injection Pump P/N     | REMAN Fuel Injection Pump P/N     |
---|---|---|---|
6FK     | 3054     | 101-3876     | 0R-9908     |
6FK     | 3054     | 101-4359     | 0R-9915     |
1ML     | 3056     | 102-9807     | 0R-9909     |
1ML     | 3056     | 103-1018     | 0R-9916     |
1ML     | 3056     | 103-2878     | 0R-9914     |
5YS     | 3054     | 141-6392     | 0R-9923     |
5YS     | 3054     | 147-1735     | 0R-9920     |
Caterpillar Information System:
3500 Generator Set Engines Valve System Components
Electronic Installation Guide{1000} Electronic Installation Guide{1000}
3500 Engines For Caterpillar Built Power Modules Aftercooler
Electronic Modular Control Panel II+ (EMCP II+) Engine Does Not Shutdown (for PEEC Engines)
Electronic Modular Control Panel II+ (EMCP II+) GSC CID 0190 - FMI 03
3126B and 3126E On-highway Engines 5 Volt Engine Pressure Sensor Supply Circuit - Test
Programmable Relay Control Module (PRCM) PRCM CID 0590 - FMI 09
Programmable Relay Control Module (PRCM) PRCM CID 0483 - FMI 04
2000/07/01 Repair Kits For Engine Speed Sensors Are Now Available {1907, 1912}
Programmable Relay Control Module (PRCM) PRCM CID 0483 - FMI 03
Programmable Relay Control Module (PRCM) PRCM CID 0482 - FMI 04
Programmable Relay Control Module (PRCM) PRCM CID 0482 - FMI 03
Electronic Modular Control Panel II+ (EMCP II+) GSC CID 0248 - FMI 09 (for EUI Engines)
C11 and C15 Engines for Caterpillar Built Machines Can Not Reach Top Engine RPM
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Electronic Service Tool Will Not Communicate with ECM
PM3516 Power Modules Reference Material
C-10, C-12, C-15 and C-16 Industrial Engines Engine Cranks but Will Not Start
Electronic Modular Control Panel II+ (EMCP II+) Engine Does Not Shutdown (for MUI 3412C, 3508,3512, 3516 Engines)
Electronic Modular Control Panel II+ (EMCP II+) Engine Does Not Shutdown (for EUI Engines)
Electronic Modular Control Panel II+ (EMCP II+) GSC CID 0168 - FMI 04
3500 Engines For Caterpillar Built Power Modules Pistons, Rings and Connecting Rods
3500 Engines For Caterpillar Built Power Modules Crankshaft
3500 Generator Set Engines Camshaft
3500 Marine Engines Cooling System Pressure Cap - Test