3176C and 3196 Engines for Caterpillar Built Machines Caterpillar


Throttle Position Sensor

Usage:

140H 126



Illustration 1g01419467

(1) Position sensor group

Output type ... PWM

Output frequency ... 500 Hz

Duty cycle ... 3.5 to 96.5 %

Operating temperature ... -40 to 85 °C (-40 to 185 °F)

Operating voltage ... 8 VDC

Caterpillar Information System:

3408E and 3412E Engines for Caterpillar Built Machines Turbocharger Outlet Pressure Sensor
3500B Engines for Caterpillar Built Power Modules with the ADEM 2 Electronic Control Module Diagnostic Codes
Electronic Modular Control Panel II+ (EMCP II+) GSC CID 0100 - FMI 02 (for MUI and PEEC Engines)
2000/05/08 Improved Caterpillar O-ring Face Seals are Now Available {7555}
C-12, C-15 and C-16 Engines for Caterpillar Built Machines CID 0342 FMI 11 Secondary Engine Speed Sensor mechanical failure
C-10, C-12, C-15 and C-16 Industrial Engines CID 0320 FMI 11 Speed/Timing Sensor mechanical failure
Alternator - Delco 21SI Alternator - Disassemble
G3516B Engines MID 036 - CID 0443 - FMI 03 Crank Terminate Relay short to +batt
3500B Engines for Caterpillar Built Power Modules with the ADEM 2 Electronic Control Module Engine Speed/Timing Sensor - Calibrate
3412 Generator Set Engines Speed/Timing Sensor
3034 Engine for Caterpillar Built Machines Basic Engine
G3516B Engines MID 036 - CID 0336 - FMI 02 Incorrect ECS Switch inputs
3126B Engines for Caterpillar Built Machines Engine Oil Pump - Remove
G3406 Engine Alarms and Shutoffs
3126B Engines for Caterpillar Built Machines Engine Oil Pump - Assemble
3126B Engines for Caterpillar Built Machines Engine Oil Pump - Disassemble
3126B Engines for Caterpillar Built Machines Flywheel - Remove and Install
3126B Engines for Caterpillar Built Machines Vibration Damper and Pulley - Remove and Install
3126B Engines for Caterpillar Built Machines Housing (Front) - Install
EMCPII+ for Gas Engines GSC CID 0100 - FMI 03
3176C and 3196 Engines for Caterpillar Built Machines Fuel Dilution of Engine Oil
3126B Engines for Caterpillar Built Machines Pistons and Connecting Rods - Disassemble
2000/05/01 Service Manual Module, RENR2484, "Electronic Modular Control Panel II+ (EMCP II+)" is Now Available {4490}
Alternator - Delco 21SI Alternator - Assemble
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.