CID 0320 FMI 11 Speed/Timing Sensor mechanical failure
产生此代码的情况:
主发动机转速/正时传感器的信号丢失 1 秒以上。
系统响应:
电子控制模块（ECM）将利用辅助发动机转速/正时传感器确定发动机转速。 ECM 将会记录此诊断代码。
当 ECM 转换到辅助发动机转速/正时传感器时，发动机的响应可能出现微小变化。
测试步骤 1. 进行以下的诊断步骤: 发动机转速 / 正时传感器电路 - 测试
结果:
- 正常 - 停止
Caterpillar Information System:
Alternator - Delco 21SI Alternator - Disassemble
G3516B Engines MID 036 - CID 0443 - FMI 03 Crank Terminate Relay short to +batt
3500B Engines for Caterpillar Built Power Modules with the ADEM 2 Electronic Control Module Engine Speed/Timing Sensor - Calibrate
3412 Generator Set Engines Speed/Timing Sensor
3034 Engine for Caterpillar Built Machines Basic Engine
G3516B Engines MID 036 - CID 0336 - FMI 02 Incorrect ECS Switch inputs
325, 325B and 325L Excavators Final Drive
C-12, C-15 and C-16 Engines for Caterpillar Built Machines CID 0342 FMI 02 Loss of Secondary Engine Speed signal
3500B Engines for Caterpillar Built Power Modules with the ADEM 2 Electronic Control Module Starting Motor System
G3516B Engines MID 036 - CID 0324 - FMI 03 Warning Lamp short to +batt
G3516B Engines MID 036 - CID 0323 - FMI 03 Shutdown Lamp short to +batt
G3406 Engine Gas Pressure Regulator Condensation - Drain
C-12, C-15 and C-16 Engines for Caterpillar Built Machines CID 0342 FMI 11 Secondary Engine Speed Sensor mechanical failure
2000/05/08 Improved Caterpillar O-ring Face Seals are Now Available {7555}
Electronic Modular Control Panel II+ (EMCP II+) GSC CID 0100 - FMI 02 (for MUI and PEEC Engines)
3500B Engines for Caterpillar Built Power Modules with the ADEM 2 Electronic Control Module Diagnostic Codes
3408E and 3412E Engines for Caterpillar Built Machines Turbocharger Outlet Pressure Sensor
3176C and 3196 Engines for Caterpillar Built Machines Throttle Position Sensor
3126B Engines for Caterpillar Built Machines Engine Oil Pump - Remove
G3406 Engine Alarms and Shutoffs
3126B Engines for Caterpillar Built Machines Engine Oil Pump - Assemble
3126B Engines for Caterpillar Built Machines Engine Oil Pump - Disassemble
3126B Engines for Caterpillar Built Machines Flywheel - Remove and Install
3126B Engines for Caterpillar Built Machines Vibration Damper and Pulley - Remove and Install