3126B Engines for Caterpillar Built Machines Caterpillar


Engine Oil Pump - Remove

Usage:

120H 124

拆卸步骤

开始:

  1. 拆下发动机油底壳。 请参阅拆解和组装, "发动机油底壳 - 拆卸和安装"。


注意

保持所有零件清洁无杂质。

杂质会造成快速磨损和缩短部件寿命。



注意

在检验、保养、测试、调整及维修产品时,务必留心,确保液体盛装在容器中。 在打开任何腔室或拆解任何储有液体的部件之前,要准备好用合适的容器收集液体。

有关适合收集和盛接卡特彼勒产品上液体的工具及用品,参考专门出版物, NENG2500, "卡特彼勒工具和修理车间设备指南"。

按照当地法规和指令处置所有液体。





    图 1g01029320

  1. 拆下螺栓 (1) 和 (2) 。

  1. 拆卸发动机机油泵 (3) 。

  1. 拆下缸体与排气弯头之间的 O 形密封圈。

Caterpillar Information System:

3176C and 3196 Engines for Caterpillar Built Machines Throttle Position Sensor
3408E and 3412E Engines for Caterpillar Built Machines Turbocharger Outlet Pressure Sensor
3500B Engines for Caterpillar Built Power Modules with the ADEM 2 Electronic Control Module Diagnostic Codes
Electronic Modular Control Panel II+ (EMCP II+) GSC CID 0100 - FMI 02 (for MUI and PEEC Engines)
2000/05/08 Improved Caterpillar O-ring Face Seals are Now Available {7555}
C-12, C-15 and C-16 Engines for Caterpillar Built Machines CID 0342 FMI 11 Secondary Engine Speed Sensor mechanical failure
C-10, C-12, C-15 and C-16 Industrial Engines CID 0320 FMI 11 Speed/Timing Sensor mechanical failure
Alternator - Delco 21SI Alternator - Disassemble
G3516B Engines MID 036 - CID 0443 - FMI 03 Crank Terminate Relay short to +batt
3500B Engines for Caterpillar Built Power Modules with the ADEM 2 Electronic Control Module Engine Speed/Timing Sensor - Calibrate
3412 Generator Set Engines Speed/Timing Sensor
3034 Engine for Caterpillar Built Machines Basic Engine
G3406 Engine Alarms and Shutoffs
3126B Engines for Caterpillar Built Machines Engine Oil Pump - Assemble
3126B Engines for Caterpillar Built Machines Engine Oil Pump - Disassemble
3126B Engines for Caterpillar Built Machines Flywheel - Remove and Install
3126B Engines for Caterpillar Built Machines Vibration Damper and Pulley - Remove and Install
3126B Engines for Caterpillar Built Machines Housing (Front) - Install
EMCPII+ for Gas Engines GSC CID 0100 - FMI 03
3176C and 3196 Engines for Caterpillar Built Machines Fuel Dilution of Engine Oil
3126B Engines for Caterpillar Built Machines Pistons and Connecting Rods - Disassemble
2000/05/01 Service Manual Module, RENR2484, "Electronic Modular Control Panel II+ (EMCP II+)" is Now Available {4490}
Alternator - Delco 21SI Alternator - Assemble
325, 325B and 325L Excavators Hydraulic System Pressure - Release
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.