Solenoid Valve (Auxiliary Circuit) - Disassemble - 1-Way/2-Way Flow
Disassembly Procedure
Start By:
- Remove the solenoid valve. Refer to Disassembly and Assembly, "Solenoid Valve (Auxiliary Circuit) 1-Way/2-Way Flow (Left) - Remove".
- Remove bolts (1) and coil (2). Remove O-ring seal (3) and shims (4). Remove O-ring seals (6) from valve group (5) .
Show/hide table
Illustration 1 | g01196591 |
- Remove retaining ring (7). Remove valve (8), retainer (9), seat (10), backup ring (11), and O-ring seal (12) .
Show/hide table
Illustration 2 | g01196592 |
- Remove adapter (13), spring (14), and valve (15). Remove O-ring seals (16) from adapter (13). Remove retaining ring (19), collar (18), and filter (17) .
Show/hide table
Illustration 3 | g01196593 |
Show/hide table
Personal injury can result from being struck by parts propelled by a released spring force. Make sure to wear all necessary protective equipment. Follow the recommended procedure and use all recommended tooling to release the spring force. |
Caterpillar Information System:
Installation of 173-2190 Work Tool Wiring Gp (KIT) for Broom Operation {1408, 6702, 6708, 7000} Installation of 173-2190 Work Tool Wiring Gp (KIT) for Broom Operation {1408, 6702, 6708, 7000}
C15 Petroleum Generator Set Engines Fuel Filter Base
3508 and 3516 EUI Engines for 5130 and 5230 Excavators Camshaft
3508 and 3516 EUI Engines for 5130 and 5230 Excavators Crankshaft
3508 EUI Engines Camshaft
3508 EUI Engines Crankshaft
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Solenoid Valve (Auxiliary Circuit) - Install - 1-Way/2-Way, Flow (Left)
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Solenoid Valve (Auxiliary Circuit) - Remove - 1-Way/2-Way, Flow (Left)
PP120 and PH126 Power Pack and Hammer Safety Messages
365C Excavator Machine Systems Boom - Install
365C Excavator Machine Systems Boom - Remove
365C Excavator Machine Systems Boom Bearings and Seals - Remove and Install
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Solenoid Valve (Auxiliary Circuit) - Assemble - 1-Way/2-Way Flow
302.5C Mini Hydraulic Excavator Machine Systems Relief Valve (Pilot) - Remove and Install
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Water Pump - Install
365C Excavator Machine Systems Stick Cylinder - Remove and Install
365C Excavator Machine Systems Boom Cylinder - Remove and Install
PP120 and PH126 Power Pack and Hammer Engine Speed Control Cylinder
302.5C Mini Hydraulic Excavator Machine Systems Solenoid Valve (Auxiliary Circuit) - Remove and Install
302.5C Mini Hydraulic Excavator Machine Systems Solenoid Valve (Travel Speed) - Remove and Install
PP120 and PH126 Power Pack and Hammer Work Tool Troubleshooting
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Crankshaft Vibration Damper and Pulley - Remove
365C Excavator Machine Systems Main Control Valve - Disassemble - Attachment, Bucket, and Boom
365C Excavator Machine Systems Main Control Valve - Assemble - Attachment, Bucket, and Boom