Crankshaft Vibration Damper and Pulley - Remove
Removal Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | -     | Stud(M16-2 by 4 1/2 inches)     | 1     |
- Remove guards (1) and (2) .
Show/hide table
Illustration 1 | g01196751 |
- Drain the engine coolant from the cooling system into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, " Cooling System Cooling (ELC) - Change".
- Open the front access door on the left side of the machine. Remove bolts (3). Open access door (4) .
Show/hide table
Illustration 2 | g01196753 |
- Attach a suitable lifting device to hood assembly (5). The weight of hood assembly (5) is approximately 68 kg (150 lb). Remove bolts (6). Remove hood assembly (5) .
Show/hide table
Illustration 3 | g01196752 |
- Remove support (8). Remove tubes (9). Disconnect hose (7).
Show/hide table
Illustration 4 | g01196932 |
- Remove cover (10) .
Show/hide table
Illustration 5 | g01196936 |
- Disconnect tube assembly (12) from cover (11). Reposition tube assembly (12). Loosen bracket (13). Remove cover (11) .
Show/hide table
Illustration 6 | g01196944 |
- Remove brace (14) .
Show/hide table
Illustration 7 | g01197008 |
- Remove bolts (15). Move cover (16) in order to remove bracket (17). Remove bolts (18). Remove bracket (17). Remove cover (16) .
Show/hide table
Illustration 8 | g01197028 |
Show/hide table
Illustration 9 | g01197041 |
- Move belt tensioner (19) in a counterclockwise direction in order to remove belt (20). Remove belt (20) .
Show/hide table
Illustration 10 | g01197053 |
- Remove one bolt (21). Install Tooling (A) .
Show/hide table
Illustration 11 | g01197067 |
- Remove the remaining bolts (21). Remove pulley (22). Remove damper assembly (23) .
Show/hide table
Illustration 12 | g01197080 |
- Remove bolts (24). Remove adapter (25) from damper (26) .
Show/hide table
Illustration 13 | g01197110 |
- Remove Tooling (A) .
Show/hide table
Illustration 14 | g01197123 |
Caterpillar Information System:
PP120 and PH126 Power Pack and Hammer Work Tool Troubleshooting
302.5C Mini Hydraulic Excavator Machine Systems Solenoid Valve (Travel Speed) - Remove and Install
302.5C Mini Hydraulic Excavator Machine Systems Solenoid Valve (Auxiliary Circuit) - Remove and Install
PP120 and PH126 Power Pack and Hammer Engine Speed Control Cylinder
365C Excavator Machine Systems Boom Cylinder - Remove and Install
365C Excavator Machine Systems Stick Cylinder - Remove and Install
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Water Pump - Install
302.5C Mini Hydraulic Excavator Machine Systems Relief Valve (Pilot) - Remove and Install
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Solenoid Valve (Auxiliary Circuit) - Assemble - 1-Way/2-Way Flow
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Solenoid Valve (Auxiliary Circuit) - Disassemble - 1-Way/2-Way Flow
Installation of 173-2190 Work Tool Wiring Gp (KIT) for Broom Operation {1408, 6702, 6708, 7000} Installation of 173-2190 Work Tool Wiring Gp (KIT) for Broom Operation {1408, 6702, 6708, 7000}
C15 Petroleum Generator Set Engines Fuel Filter Base
365C Excavator Machine Systems Main Control Valve - Disassemble - Attachment, Bucket, and Boom
365C Excavator Machine Systems Main Control Valve - Assemble - Attachment, Bucket, and Boom
365C Excavator Machine Systems Main Control Valve - Disassemble - Proportional Valve
365C Excavator Machine Systems Main Control Valve - Assemble - Proportional Valve
365C Excavator Machine Systems Main Control Valve - Disassemble - Manifold Valve
365C Excavator Machine Systems Main Control Valve - Assemble - Manifold Valve
365C Excavator Machine Systems Main Control Valve - Disassemble - Right Travel, Left Travel, and Stick
365C Excavator Machine Systems Main Control Valve - Assemble - Right Travel, Left Travel, and Stick
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Counterbalance Valve (Travel) - Remove
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Counterbalance Valve (Travel) - Install
725C2, 730C2 Ejector Articulated Trucks - Machine Systems Ejector Cylinder - Disassemble - Three Stage Cylinder and Four Stage Cylinder
725C2, 730C2 Ejector Articulated Trucks - Machine Systems Ejector Cylinder - Assemble - Three Stage Cylinder and Four Stage Cylinder