Water Pump - Install
Installation Procedure
- Install O-ring seal (23) onto water pump (19) .
Show/hide table
Illustration 1 | g01196466 |
- Position water pump (19). Install bolts (22).
Show/hide table
Illustration 2 | g01196462 |
- Install belt tensioner (21). Move belt tensioner (21) in a counterclockwise direction in order to Install belt (20). Install belt (20).
Show/hide table
Illustration 3 | g01196461 |
- Connect tube (18) onto water pump (19). Install tube (17) .
Show/hide table
Illustration 4 | g01196459 |
- Install bracket (15) and tube (16) .
Show/hide table
Illustration 5 | g01196456 |
- Position housing assembly (14). Install bolts (13). Connect hose (12).
Show/hide table
Illustration 6 | g01196457 |
- Install cover (9). Position tube assembly (10). Connect tube assembly (10) onto cover (9). Tighten bracket (11).
Show/hide table
Illustration 7 | g01196454 |
- Install cover (8) .
Show/hide table
Illustration 8 | g01196453 |
- Install tubes (7). Install support (6). Connect hose (5).
Note: Hoses (5) are color coded. The hoses must be installed in the original position.
Show/hide table
Illustration 9 | g01217399 |
- Attach a suitable lifting device to hood assembly (3). The weight of hood assembly (3) is approximately 68 kg (150 lb). Install hood assembly (3). Install bolts (4) .
Show/hide table
Illustration 10 | g01196450 |
- Close access door (2). Install bolts (1) .
Show/hide table
Illustration 11 | g01196441 |
- Fill the engine cooling system. Refer to Operation and Maintenance Manual, " Cooling System Cooling (ELC) - Change".
Caterpillar Information System:
302.5C Mini Hydraulic Excavator Machine Systems Relief Valve (Pilot) - Remove and Install
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Solenoid Valve (Auxiliary Circuit) - Assemble - 1-Way/2-Way Flow
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Solenoid Valve (Auxiliary Circuit) - Disassemble - 1-Way/2-Way Flow
Installation of 173-2190 Work Tool Wiring Gp (KIT) for Broom Operation {1408, 6702, 6708, 7000} Installation of 173-2190 Work Tool Wiring Gp (KIT) for Broom Operation {1408, 6702, 6708, 7000}
C15 Petroleum Generator Set Engines Fuel Filter Base
3508 and 3516 EUI Engines for 5130 and 5230 Excavators Camshaft
3508 and 3516 EUI Engines for 5130 and 5230 Excavators Crankshaft
3508 EUI Engines Camshaft
3508 EUI Engines Crankshaft
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Solenoid Valve (Auxiliary Circuit) - Install - 1-Way/2-Way, Flow (Left)
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Solenoid Valve (Auxiliary Circuit) - Remove - 1-Way/2-Way, Flow (Left)
PP120 and PH126 Power Pack and Hammer Safety Messages
365C Excavator Machine Systems Stick Cylinder - Remove and Install
365C Excavator Machine Systems Boom Cylinder - Remove and Install
PP120 and PH126 Power Pack and Hammer Engine Speed Control Cylinder
302.5C Mini Hydraulic Excavator Machine Systems Solenoid Valve (Auxiliary Circuit) - Remove and Install
302.5C Mini Hydraulic Excavator Machine Systems Solenoid Valve (Travel Speed) - Remove and Install
PP120 and PH126 Power Pack and Hammer Work Tool Troubleshooting
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Crankshaft Vibration Damper and Pulley - Remove
365C Excavator Machine Systems Main Control Valve - Disassemble - Attachment, Bucket, and Boom
365C Excavator Machine Systems Main Control Valve - Assemble - Attachment, Bucket, and Boom
365C Excavator Machine Systems Main Control Valve - Disassemble - Proportional Valve
365C Excavator Machine Systems Main Control Valve - Assemble - Proportional Valve
365C Excavator Machine Systems Main Control Valve - Disassemble - Manifold Valve