Solenoid Valve (Auxiliary Circuit) - Install - 1-Way/2-Way, Flow (Left)
Installation Procedure
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | FT-2674 | Vacuum Cap | 1 |
- Install solenoid valve (7) onto block (8). Tighten solenoid valve (7) to a torque of 196 ± 20 N·m (145 ± 15 lb ft).
Show/hide table
 | |
| Illustration 1 | g01196481 |
- Position solenoid valve assembly (4) and install bolts (5). Connect harness assembly (6) .
Show/hide table
 | |
| Illustration 2 | g01196480 |
- Position block assembly (1) and install bolts (2). Connect hose assembly (3). Tighten hose assembly (3) to a torque of 190 ± 20 N·m (140 ± 15 lb ft).
Show/hide table
 | |
| Illustration 3 | g01196479 |
- Remove Tooling (A) from the hydraulic tank.
Show/hide table
 | |
| Illustration 4 | g01196137 |
Note: The installation procedure for the right solenoid valve is similar.
Caterpillar Information System:
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Solenoid Valve (Auxiliary Circuit) - Remove - 1-Way/2-Way, Flow (Left)
PP120 and PH126 Power Pack and Hammer Safety Messages
365C Excavator Machine Systems Boom - Install
365C Excavator Machine Systems Boom - Remove
365C Excavator Machine Systems Boom Bearings and Seals - Remove and Install
365C Excavator Machine Systems Stick - Install
365C Excavator Machine Systems Stick - Remove
365C Excavator Machine Systems Stick Bearings and Seals - Remove and Install
C7 Engine for AP-1000D, AP-1055D, BG-2455D, and BG-260D Asphalt Pavers Engine Will Not Crank
PP120 and PH126 Power Pack and Hammer Engine
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Water Pump - Remove
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Solenoid Valve (Auxiliary Circuit) - Install - 1-Way/2-Way, Check (Left)
3508 EUI Engines Crankshaft
3508 EUI Engines Camshaft
3508 and 3516 EUI Engines for 5130 and 5230 Excavators Crankshaft
3508 and 3516 EUI Engines for 5130 and 5230 Excavators Camshaft
C15 Petroleum Generator Set Engines Fuel Filter Base
Installation of 173-2190 Work Tool Wiring Gp (KIT) for Broom Operation {1408, 6702, 6708, 7000} Installation of 173-2190 Work Tool Wiring Gp (KIT) for Broom Operation {1408, 6702, 6708, 7000}
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Solenoid Valve (Auxiliary Circuit) - Disassemble - 1-Way/2-Way Flow
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Solenoid Valve (Auxiliary Circuit) - Assemble - 1-Way/2-Way Flow
302.5C Mini Hydraulic Excavator Machine Systems Relief Valve (Pilot) - Remove and Install
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Water Pump - Install
365C Excavator Machine Systems Stick Cylinder - Remove and Install
365C Excavator Machine Systems Boom Cylinder - Remove and Install