Relief Valve (Transmission Lubrication)
Show/hide table
Illustration 1 | g01076382 |
Show/hide table
Illustration 2 | g01056265 |
View A-A |
Show/hide table
Illustration 3 | g01076383 |
Section B-B |
Show/hide table
Illustration 4 | g01076385 |
Section C-C |
Bench test specifications
- Pressure setting ...
554 ± 35 kPa (80 ± 5 psi) - Bypass drain flow ...
15 ± 2 L/min (4 ± 0.5 US gpm) - Bypass drain flow ...
(1) O-Ring Adapter
- Final installation torque ...
35 ± 4 N·m (26 ± 3 lb ft)
(2) Lubrication relief valve
- Final installation torque ...
41 ± 7 N·m (30 ± 5 lb ft)
(3) Test Port
- Final installation torque ...
34 ± 3 N·m (25 ± 2 lb ft)
(4) Cap
- Final installation torque ...
41 ± 7 N·m (30 ± 5 lb ft)
(5) 189-0563 Spring
- Length under test force ...
37.23 mm (1.466 inch) - Test force ...
159 ± 7.95 N·m (117.2720 ± 5.863 lb ft) - Free length after test ...
46.62 mm (1.835 inch) - Outside diameter ...
21.44 mm (0.844 inch) - Test force ...
(6) Dimension of the countersink of the orifice plug ...
Caterpillar Information System:
P16, P20, P25, P28, P40 and P60 Pulverizers Crushing Arm - Install
3612 and 3616 Engines Engine Rotation
2000/03/01 Be Sure The 163-6108 Timing Control (G3412) And 163-6164 Timing Control (G3408) Is Correctly Installed On Engines Equipped With The CAT Digital Ignition System {1901}
P16, P20, P25, P28, P40 and P60 Pulverizers Crushing Arm - Remove
3612 and 3616 Engines Fuel Injector Testing
3054 Engine Compression - Test
3524B Engines for 797 and 797B Off-Highway Trucks General Information (Fuel System) - Diesel
G3516B Engines System Overview
723PLUS Digital Speed Control Control Specifications
3408E and 3412E Industrial Engines CAT Data Link Circuit - Test
325D and 329D Excavators Fuel Tank Cap and Strainer - Clean
Electronic Modular Control Panel II+ (EMCP II+) Spare Input/Output Programming OP6 - For EUI And PEEC Engines
3612 and 3616 Engines Finding the Top Center Position for the No. 1 Piston
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Self-Diagnostics
3612 and 3616 Engines Timing Adjustments for Fuel System
C15 and C18 Petroleum Generator Sets Generator Set Intended for Stationary Use Only
3406C Truck Engine Engine Has Early Wear
345C Excavator and 345C Material Handler Machine System Specifications Travel Motor
3612 and 3616 Engines Camshaft Timing
325D and 329D Excavators Swing Bearing - Lubricate
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for <B>109-1595</B> Generator through <B>109-3774</B> Generator
320D Excavator Swing Drive Oil - Change
3406C Truck Engine Engine Misfires, Runs Rough or Is Unstable
2000/04/01 New Water Pump Group Includes Many Improvements {1361}