Turbocharger - Install
Installation Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 5P-3931     | Anti-Seize Compound     | 1     |
- Install the O-ring seal in the exhaust manifold. Apply Tooling (A) on the threads of the mounting bolts on the exhaust manifold. Position turbocharger (13) and install nuts (12). Connect tube assembly (15) to the engine block. Connect hose assembly (14) and clamp (11) .
Show/hide table
Illustration 1 | g01183237 |
- Tighten clamps (10). Connect drain tube (9) .
Show/hide table
Illustration 2 | g01183394 |
- Install panel (8) .
Show/hide table
Illustration 3 | g01183227 |
- Install panel (5). Connect elbow (7) and hose (6). Install hose (4) and guards (2) and (3) .
Show/hide table
Illustration 4 | g01183198 |
Show/hide table
Illustration 5 | g01183194 |
- Install guard (1) .
Show/hide table
Illustration 6 | g01183181 |
Caterpillar Information System:
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Swing Gear and Bearing - Remove and Install
365C Excavator Engine Supplement Muffler - Install
M318C and M322C Excavators Machine Systems Boom Cylinder - Remove and Install
M318C and M322C Excavators Machine Systems Boom - Install
M318C and M322C Excavators Machine Systems Boom - Remove
C6.6 Engines for Caterpillar Built Machines Camshaft Bearings
302.5C Mini Hydraulic Excavator Machine Systems Final Drive and Travel Motor - Assemble
302.5C Mini Hydraulic Excavator Machine Systems Final Drive and Travel Motor - Disassemble
325C Excavator Engine Supplement Refrigerant Compressor - Remove and Install
325C Excavator Engine Supplement Water Pump - Remove and Install
325C Excavator Engine Supplement Muffler - Remove and Install
325C Excavator Engine Supplement Fuel Priming Pump - Remove and Install
325C Excavator Engine Supplement Turbocharger - Remove
345C MHPU Mobile Hydraulic Power Unit Machine Systems Gear Pump (Auxiliary) - Disassemble
345C MHPU Mobile Hydraulic Power Unit Machine Systems Gear Pump (Auxiliary) - Assemble
2005/07/11 Improved Fuel/Water Separators are now Used {1260, 1261, 1263}
325D and 329D Excavators Hydraulic System Relief Valve (Main)
325C LCR Excavator Machine Systems Final Drive - Assemble
C7.1 Engines for Caterpillar Built Machines Boost Pressure Sensor
C7.1 Engines for Caterpillar Built Machines Coolant Temperature Sensor
C7.1 Engines for Caterpillar Built Machines Inlet Manifold Temperature Sensor
C6.6 Engines for Caterpillar Built Machines Electronic Control Module
C7.1 Engines for Caterpillar Built Machines Engine Oil Pressure Sensor
C7.1 Engines for Caterpillar Built Machines Inlet Manifold