Turbocharger - Remove
Removal Procedure
- Remove guard (1) .
Show/hide table
Illustration 1 | g01183181 |
- Remove guards (2) and (3) and hose (4). Disconnect hose (6) and elbow (7). Remove panel (5) .
Show/hide table
Illustration 2 | g01183194 |
Show/hide table
Illustration 3 | g01183198 |
- Remove panel (8) .
Show/hide table
Illustration 4 | g01183227 |
- Disconnect drain tube (9). Loosen clamps (10) .
Show/hide table
Illustration 5 | g01183394 |
- Disconnect clamp (11), hose assembly (14), and tube assembly (15) from the engine block. Remove the O-ring seal, nuts (12) and turbocharger (13) .
Show/hide table
Illustration 6 | g01183237 |
Caterpillar Information System:
325C Excavator Engine Supplement Turbocharger - Install
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Swing Gear and Bearing - Remove and Install
365C Excavator Engine Supplement Muffler - Install
M318C and M322C Excavators Machine Systems Boom Cylinder - Remove and Install
M318C and M322C Excavators Machine Systems Boom - Install
M318C and M322C Excavators Machine Systems Boom - Remove
C6.6 Engines for Caterpillar Built Machines Camshaft Bearings
302.5C Mini Hydraulic Excavator Machine Systems Final Drive and Travel Motor - Assemble
302.5C Mini Hydraulic Excavator Machine Systems Final Drive and Travel Motor - Disassemble
325C Excavator Engine Supplement Refrigerant Compressor - Remove and Install
325C Excavator Engine Supplement Water Pump - Remove and Install
325C Excavator Engine Supplement Muffler - Remove and Install
345C MHPU Mobile Hydraulic Power Unit Machine Systems Gear Pump (Auxiliary) - Disassemble
345C MHPU Mobile Hydraulic Power Unit Machine Systems Gear Pump (Auxiliary) - Assemble
2005/07/11 Improved Fuel/Water Separators are now Used {1260, 1261, 1263}
325D and 329D Excavators Hydraulic System Relief Valve (Main)
325C LCR Excavator Machine Systems Final Drive - Assemble
C7.1 Engines for Caterpillar Built Machines Boost Pressure Sensor
C7.1 Engines for Caterpillar Built Machines Coolant Temperature Sensor
C7.1 Engines for Caterpillar Built Machines Inlet Manifold Temperature Sensor
C6.6 Engines for Caterpillar Built Machines Electronic Control Module
C7.1 Engines for Caterpillar Built Machines Engine Oil Pressure Sensor
C7.1 Engines for Caterpillar Built Machines Inlet Manifold
365C Excavator Engine Supplement Engine Front Mount - Remove