Muffler - Remove and Install
Removal Procedure
- Remove panels (1), (2), (3), and (4) .
Show/hide table
Illustration 1 | g01183039 |
- Remove panels (5) and (6) .
Show/hide table
Illustration 2 | g01183040 |
- Remove elbow (7) and brackets (8) and (9). Disconnect prop rod (10) .
Show/hide table
Illustration 3 | g01183042 |
- Remove bolts (11), (12), (13), and (14) .
Show/hide table
Illustration 4 | g01183043 |
- Use a pry bar to position bracket (15) away from the muffler by prying against bracket (17). Use vice grips to hold bracket (15) to shield (16), as shown.
Show/hide table
Illustration 5 | g01183045 |
- Disconnect clamp (21) and remove clamps (19). Disconnect tube assembly (20) from the bottom of muffler (18). Remove muffler (18) .
Show/hide table
Illustration 6 | g01183046 |
- Remove clamp (22) and disconnect pipe (23) from muffler (21) .
Show/hide table
Illustration 7 | g01183047 |
Installation Procedure
- Connect pipe (23) to muffler (21) and install clamp (22) .
Show/hide table
Illustration 8 | g01183047 |
- Position muffler (18). Install clamps (19) and connect clamp (21). Connect tube assembly (20) to the bottom of muffler (18) .
Show/hide table
Illustration 9 | g01183046 |
- Remove the pry bar and the vice grips. Reposition brackets (17) and (15) and shield (16) to the original positions.
Show/hide table
Illustration 10 | g01183045 |
- Install bolts (11), (12), (13), and (14) .
Show/hide table
Illustration 11 | g01183043 |
- Connect prop rod (10). Install brackets (8) and (9) and elbow (7).
Show/hide table
Illustration 12 | g01183042 |
- Install panels (5) and (6) .
Show/hide table
Illustration 13 | g01183040 |
- Install panels (1), (2), (3), and (4) .
Show/hide table
Illustration 14 | g01183039 |
Caterpillar Information System:
325C Excavator Engine Supplement Fuel Priming Pump - Remove and Install
C6.6 Engines for Caterpillar Built Machines Main Bearing Journal
C6.6 Engines for Caterpillar Built Machines Connecting Rod Bearing Journal
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Swing Boom Cylinder - Remove and Install
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Boom Cylinder - Remove and Install
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Stick Cylinder - Remove and Install
M318C and M322C Excavators Machine Systems Control Valve (Hydraulic Generator) - Install
M318C and M322C Excavators Machine Systems Control Valve (Hydraulic Generator) - Remove
C9 Generator Set Fuel System Primary Filter/Water Separator - Drain
320D and 323D Excavators Hydraulic System Pump Control (Main Hydraulic) - Main Pump Regulator
365C Excavator Engine Supplement Engine Enclosure - Install
365C Excavator Engine Supplement Engine Enclosure - Remove
325C Excavator Engine Supplement Water Pump - Remove and Install
325C Excavator Engine Supplement Refrigerant Compressor - Remove and Install
302.5C Mini Hydraulic Excavator Machine Systems Final Drive and Travel Motor - Disassemble
302.5C Mini Hydraulic Excavator Machine Systems Final Drive and Travel Motor - Assemble
C6.6 Engines for Caterpillar Built Machines Camshaft Bearings
M318C and M322C Excavators Machine Systems Boom - Remove
M318C and M322C Excavators Machine Systems Boom - Install
M318C and M322C Excavators Machine Systems Boom Cylinder - Remove and Install
365C Excavator Engine Supplement Muffler - Install
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Swing Gear and Bearing - Remove and Install
325C Excavator Engine Supplement Turbocharger - Install
325C Excavator Engine Supplement Turbocharger - Remove