Fuel Priming Pump - Remove and Install
Removal Procedure
- Remove mounting bolts (1) and place the filter housing aside.
Show/hide table
 | |
| Illustration 1 | g01183963 |
- Disconnect harness assembly (4). Remove bolts (3) and fuel priming pump (2) .
Show/hide table
 | |
| Illustration 2 | g01183964 |
Installation Procedure
- Position fuel priming pump (2) and install bolts (3). Connect harness assembly (4) .
Show/hide table
| | |
| Illustration 3 | g01183964 |
- Position the filter housing and install mounting bolts (1) .
Show/hide table
| | |
| Illustration 4 | g01183963 |
Caterpillar Information System:
C6.6 Engines for Caterpillar Built Machines Main Bearing Journal
C6.6 Engines for Caterpillar Built Machines Connecting Rod Bearing Journal
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Swing Boom Cylinder - Remove and Install
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Boom Cylinder - Remove and Install
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Stick Cylinder - Remove and Install
M318C and M322C Excavators Machine Systems Control Valve (Hydraulic Generator) - Install
M318C and M322C Excavators Machine Systems Control Valve (Hydraulic Generator) - Remove
C9 Generator Set Fuel System Primary Filter/Water Separator - Drain
320D and 323D Excavators Hydraulic System Pump Control (Main Hydraulic) - Main Pump Regulator
365C Excavator Engine Supplement Engine Enclosure - Install
365C Excavator Engine Supplement Engine Enclosure - Remove
365C Excavator Engine Supplement Muffler - Remove
325C Excavator Engine Supplement Muffler - Remove and Install
325C Excavator Engine Supplement Water Pump - Remove and Install
325C Excavator Engine Supplement Refrigerant Compressor - Remove and Install
302.5C Mini Hydraulic Excavator Machine Systems Final Drive and Travel Motor - Disassemble
302.5C Mini Hydraulic Excavator Machine Systems Final Drive and Travel Motor - Assemble
C6.6 Engines for Caterpillar Built Machines Camshaft Bearings
M318C and M322C Excavators Machine Systems Boom - Remove
M318C and M322C Excavators Machine Systems Boom - Install
M318C and M322C Excavators Machine Systems Boom Cylinder - Remove and Install
365C Excavator Engine Supplement Muffler - Install
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Swing Gear and Bearing - Remove and Install
325C Excavator Engine Supplement Turbocharger - Install