Swing Gear and Bearing - Remove and Install
Removal Procedure
Start By:
- Separate the upper frame from the undercarriage. Refer to Disassembly and Assembly, "Upper Frame and Undercarraige Frame - Separate".
- Remove bolts (1). Remove swing gear and bearing (2) .
Show/hide table
Illustration 1 | g01183159 |
Installation Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 9S-3263     | Thread Lock Compound     | 1     |
- Position the swing gear and bearing (2). Apply Tooling (A) to bolts (1). Install bolts (1) and tighten bolts (1) to a torque of 40 ± 7 N·m (30 ± 5 lb ft).
Note: The swing gear and bearing must be oriented so that the timing Mark "S" is on the left side of the machine.
Show/hide table
Illustration 2 | g01183159 |
Show/hide table
Illustration 3 | g01183195 |
End By: Connect the upper frame to the undercarriage. Refer to Disassembly and Assembly, "Upper Frame and Undercarraige Frame - Connect".
Caterpillar Information System:
365C Excavator Engine Supplement Muffler - Install
M318C and M322C Excavators Machine Systems Boom Cylinder - Remove and Install
M318C and M322C Excavators Machine Systems Boom - Install
M318C and M322C Excavators Machine Systems Boom - Remove
C6.6 Engines for Caterpillar Built Machines Camshaft Bearings
302.5C Mini Hydraulic Excavator Machine Systems Final Drive and Travel Motor - Assemble
302.5C Mini Hydraulic Excavator Machine Systems Final Drive and Travel Motor - Disassemble
325C Excavator Engine Supplement Refrigerant Compressor - Remove and Install
325C Excavator Engine Supplement Water Pump - Remove and Install
325C Excavator Engine Supplement Muffler - Remove and Install
325C Excavator Engine Supplement Fuel Priming Pump - Remove and Install
C6.6 Engines for Caterpillar Built Machines Main Bearing Journal
325C Excavator Engine Supplement Turbocharger - Install
325C Excavator Engine Supplement Turbocharger - Remove
345C MHPU Mobile Hydraulic Power Unit Machine Systems Gear Pump (Auxiliary) - Disassemble
345C MHPU Mobile Hydraulic Power Unit Machine Systems Gear Pump (Auxiliary) - Assemble
2005/07/11 Improved Fuel/Water Separators are now Used {1260, 1261, 1263}
325D and 329D Excavators Hydraulic System Relief Valve (Main)
325C LCR Excavator Machine Systems Final Drive - Assemble
C7.1 Engines for Caterpillar Built Machines Boost Pressure Sensor
C7.1 Engines for Caterpillar Built Machines Coolant Temperature Sensor
C7.1 Engines for Caterpillar Built Machines Inlet Manifold Temperature Sensor
C6.6 Engines for Caterpillar Built Machines Electronic Control Module
C7.1 Engines for Caterpillar Built Machines Engine Oil Pressure Sensor