345C MHPU Mobile Hydraulic Power Unit Machine Systems Caterpillar


Gear Pump (Auxiliary) - Assemble

Usage:

345C L B6N

组装步骤

表 1
所需工具    
工具     零件号     零件说明     数量    
A     1P-1857     挡圈钳     1    



    图 1g01183383

  1. 将轴承 (12) 安装到壳体 (13) 中。



    图 2g01183382

  1. 对于密封件,请参阅步骤5。

  1. 安装板 (11) 。



    图 3g01183380

  1. 安装齿轮 (10) 。



    图 4g01183378

  1. 安装密封件 (8) 和密封件 (9) 。

  1. 安装板 (7) 。



    图 5g01183377

  1. 安装唇形密封 (6) 。

  1. 利用工具 (A) 安装挡圈 (5) 。



    图 6g01183376

  1. 安装轴承 (4) 和 O 形密封圈 (3) 。



    图 7g01183374

  1. 安装法兰 (2) 和螺栓 (1) 。

End By: 安装齿轮泵。 请参阅 拆解和组装, "齿轮泵(辅助)- 安装"。

Caterpillar Information System:

345C MHPU Mobile Hydraulic Power Unit Machine Systems Gear Pump (Auxiliary) - Disassemble
325C Excavator Engine Supplement Turbocharger - Remove
325C Excavator Engine Supplement Turbocharger - Install
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Swing Gear and Bearing - Remove and Install
365C Excavator Engine Supplement Muffler - Install
M318C and M322C Excavators Machine Systems Boom Cylinder - Remove and Install
M318C and M322C Excavators Machine Systems Boom - Install
M318C and M322C Excavators Machine Systems Boom - Remove
C6.6 Engines for Caterpillar Built Machines Camshaft Bearings
302.5C Mini Hydraulic Excavator Machine Systems Final Drive and Travel Motor - Assemble
302.5C Mini Hydraulic Excavator Machine Systems Final Drive and Travel Motor - Disassemble
325C Excavator Engine Supplement Refrigerant Compressor - Remove and Install
2005/07/11 Improved Fuel/Water Separators are now Used {1260, 1261, 1263}
325D and 329D Excavators Hydraulic System Relief Valve (Main)
325C LCR Excavator Machine Systems Final Drive - Assemble
C7.1 Engines for Caterpillar Built Machines Boost Pressure Sensor
C7.1 Engines for Caterpillar Built Machines Coolant Temperature Sensor
C7.1 Engines for Caterpillar Built Machines Inlet Manifold Temperature Sensor
C6.6 Engines for Caterpillar Built Machines Electronic Control Module
C7.1 Engines for Caterpillar Built Machines Engine Oil Pressure Sensor
C7.1 Engines for Caterpillar Built Machines Inlet Manifold
365C Excavator Engine Supplement Engine Front Mount - Remove
365C Excavator Engine Supplement Engine Front Mount - Install
365C Excavator Engine Supplement Engine Rear Mount - Remove
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.