Muffler - Install
安装步骤
Show/hide table
| 所需工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件说明 | 数量 |
| A | 138-7575 | 连杆支架 | 2 |
- 使用适当的起吊设备定位消声器 (14) 。 消音器 (14) 的重量约为 68 kg (150 lb)。
Show/hide table
 | |
| 图 1 | g01183071 |
- 连接卡箍 (13) 。
Show/hide table
 | |
| 图 2 | g01183069 |
- 安装卡箍 (11) 和 (12) 。
Show/hide table
 | |
| 图 3 | g01183068 |
- 将管组件 (10) 连接到消音器底部。
Show/hide table
 | |
| 图 4 | g01183064 |
- 利用工具 (A) 和适当的起吊设备定位面板 (7) 。
Show/hide table
 | |
| 图 5 | g01183061 |
Show/hide table
 | |
| 图 6 | g01183063 |
Show/hide table
 | |
| 图 7 | g01183062 |
- 安装螺栓 (8) 和 (9) 。
- 安装螺栓 (6) 。
Show/hide table
 | |
| 图 8 | g01183060 |
- 利用适当的起吊设备定位盖 (5) 。 盖 (5) 的重量约为 79 kg (175 lb)。
Show/hide table
 | |
| 图 9 | g01183059 |
- 安装螺栓 (3) 。
Show/hide table
 | |
| 图 10 | g01183058 |
- 安装两侧的螺栓 (2) 。
Show/hide table
 | |
| 图 11 | g01183056 |
- 关闭门 (1) 。
Show/hide table
 | |
| 图 12 | g01183055 |
Caterpillar Information System:
M318C and M322C Excavators Machine Systems Boom Cylinder - Remove and Install
M318C and M322C Excavators Machine Systems Boom - Install
M318C and M322C Excavators Machine Systems Boom - Remove
C6.6 Engines for Caterpillar Built Machines Camshaft Bearings
302.5C Mini Hydraulic Excavator Machine Systems Final Drive and Travel Motor - Assemble
302.5C Mini Hydraulic Excavator Machine Systems Final Drive and Travel Motor - Disassemble
325C Excavator Engine Supplement Refrigerant Compressor - Remove and Install
325C Excavator Engine Supplement Water Pump - Remove and Install
325C Excavator Engine Supplement Muffler - Remove and Install
325C Excavator Engine Supplement Fuel Priming Pump - Remove and Install
C6.6 Engines for Caterpillar Built Machines Main Bearing Journal
C6.6 Engines for Caterpillar Built Machines Connecting Rod Bearing Journal
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Swing Gear and Bearing - Remove and Install
325C Excavator Engine Supplement Turbocharger - Install
325C Excavator Engine Supplement Turbocharger - Remove
345C MHPU Mobile Hydraulic Power Unit Machine Systems Gear Pump (Auxiliary) - Disassemble
345C MHPU Mobile Hydraulic Power Unit Machine Systems Gear Pump (Auxiliary) - Assemble
2005/07/11 Improved Fuel/Water Separators are now Used {1260, 1261, 1263}
325D and 329D Excavators Hydraulic System Relief Valve (Main)
325C LCR Excavator Machine Systems Final Drive - Assemble
C7.1 Engines for Caterpillar Built Machines Boost Pressure Sensor
C7.1 Engines for Caterpillar Built Machines Coolant Temperature Sensor
C7.1 Engines for Caterpillar Built Machines Inlet Manifold Temperature Sensor
C6.6 Engines for Caterpillar Built Machines Electronic Control Module